With the environmental meter it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The environmental meter offers features such as average value, maximum, minimum, and hold functions at a reasonable price.

- Internal probe
- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

- incl. ISO Calibration Certificate 

 

- Measuring range up to 30,000 G
- DC Milli Tesla, DC Gauss
- AC Milli Tesla, AC Gauss, frequency from 40 to 500 Hz
- Temperature sensor
- Switchable AC or DC measurement
- Memory: Manual / Automatic

With the environmental meter PCE-EMF 40, it is possible to measure magnetic fields up to 2000 mG directly. At the same time, the environmental meter shows the strength of the magnetic field numerically using an X, Y and Z axis.

- Measuring ranges: 20.00 ... 200.0 µT / 200.0 ... 2000 mG
- Bandwidth: 50 MHz ... 3.5 GHz
- Units: V / m, mV / m, V / m, µW / cm², µW / m², mW / m², mA / m

PCE-MMK 1 is a portable handheld digital moisture meter used to measure the moisture content of wood, paper, textiles, concrete and other building materials. This multifunction environmental meter also measures ambient temperature and ambient relative humidity.

Measuring ranges:
- Wood, paper, textiles: 1 ... 75% moisture
- Concrete, building materials: 0.1 ... 2.4% moisture
- Ambient temperature: -40 ... 70°C / -40 ... 158°F
- Ambient relative humidity (RH): 0 ... 100 % RH

The environmental meter is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The environmental meter is equipped with various sensors.

Parameters / Measuring ranges:
- Temperature: 0 ... +50 ºC / 32 ... 122 ºF
- Ambient humidity: 0 ... 100% RH
- Atmospheric pressure: 300 ... 2000 hPa
- CO2: 0 ... 40000 ppm
- 32 GB data storage
- E-paper display with histogram display
- Good / medium / bad rating
- Battery life: approx. 10 months
- incl. ISO calibration certificate

The environmental meter with a pitot tube that measures air velocities up to 80 m/s. It is possible to measure air speed, air pressure, air flow, differential pressure and ambient temperature with this mobile environmental meter. Readings can be taken in narrow pipes and other restricted spaces because the pitot tube can be inserted in very small gaps.-

- Measures air velocities up to 80 m/s / 262 ft/s, 2.24 ... 178.66 MPH  
- Zero, minimum, maximum, average, record and hold functions
- Stores to memory up to 99 measurement values per parameter
- Includes ISO calibration certificate

The environmental meter is a professional radiation meter for the very precise detection of alpha, beta and gamma radiation. This environmental meter has a large measuring range and can be used for sporadic on-site measurements or for long-term measurements or monitoring.

- Ranges: 0.01µSv/h...1000µSv/h
- Detector: Geiger-Müller counter tube
- Memory: 2kB
- Including software, data cable and certificate
- Rechargeable battery as a power source that is charged via USB (mains adapter or PC).

The environmental meter is a useful handheld pH meter for food. The pH can be read off the large LCD display. pH measurement in foodstuffs production and processing is a ubiquitous method of measurement. It is needed in many downstream process steps and has a direct influence on the tactile, sensory and hygienic quality of foodstuffs.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- Food: Meat etc.
- Including ISO calibration certificate

Compact environmental meter for weather monitoring. Basic environmental meter with 4 … 20 mA output. Measurement of the horizontal wind direction with an analogue output signal. The wind vane is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 360°
- Output signal: 4 ... 20 mA
- Assembly: pipe assembly / assembly via PG screw connection
- Heating: yes

The environmental meter with microprocessor is a high precision 1-channel temperature gauge. The environmental meter with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.

- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2 % r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

The environmental meter is a very easy to use handheld pH meter and allows a fast and reliable pH measurement of wine. The environmental meter has a three-point calibration which is performed automatically. Very well suited to the field of viticulture.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- especially for wine, beer and other solutions with low conductivity
- incl. ISO Calibration Certificate

The PCE-VA 20 is a versatile environmental meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This environmental meter device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.

- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±
  (3% of measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1
- Incl. ISO Calibration Certificate 

This environmental meter is very economical. With this environmental meter you can measure wind speed and air temperature.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
- Incl. ISO calibration certificate

The environmental meter consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, and a light transmitter. The main field of application of the light meter is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.  

 

- Measuring range: 0 ... 50,000 lux in three ranges
- Resolution: 0.1 lx / 1 lx
- Accuracy: ± 5% of the reading
- Incl. ISO calibration certificate

Measuring function
- Temperature: -10 ... 80°C / 14 ... 176°F
- Dew point: -10 ... 80°C / 14 ... 176°F
- Humidity: 0 ... 100% RH
- 16 GB of memory
- Storage as CSV