The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the flow tester is quite simple.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe sizes: 50 … 720 mm (approx. 1.9 … 28")20 …108 mm (approx. 0.8 … 4.2")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, Z
• Incl. sensors TDS-HM and TDS-HS on rails
• Incl. ISO Calibration Certificate

PCE-TDS 100HSH-ICA is a portable handheld clamp-on ultrasonic flow tester used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in … 4in. Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, (N,W)
• Incl. sensors TDS-M1 and TDS-S1
• Incl. ISO Calibration Certificate

PCE-TDS 100HS-ICA is a portable handheld clamp-on ultrasonic flow tester used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in … 4in. Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, (N,W)
• Incl. sensors TDS-S1
• Incl. ISO Calibration Certificate

PCE-TDS 100H-ICA is a portable handheld clamp-on ultrasonic flow tester used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 … 28 in.  Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, Z
• Incl. sensors TDS-M1
• Incl. ISO Calibration Certificate

The PCE-TG 300-P5EE is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

• Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO2 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO7 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5/90 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Sensor at 90° angle
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

• Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
• Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
• Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
• Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
• Memory size: 1,000 groups for measurement data and 20 groups for calibration data
• Different probe types (also automatic motorized probes) available

The ultrasonic leak detector is used in various areas of industry. For example, the ultrasonic leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

• Working frequency: 40 kHz (± 2 kHz)
• Operating time: >10 hours
• Various attachments
• Color display: 3.5" touch panel TFT
• Soundproof headphones