Products for 'Sonda temperatura externa PCE 310 TF '

US$ 570.00

ex. VAT, ex. delivery costs

The Anemometer PCE-WSAC 50-310 can be used in different fields of application. In use, the Anemometer carries out measurements from the smallest wind movements. The Anemometer can be used to monitor and alert on the current wind speed.

Wind measuring device with adjustable alarms
2 alarm types
Supply voltage: 24 V DC
Input signal: 4 … 20 mA
Sensor supply via evaluation device
Degree of protection: IP66
Incl. ISO calibration certificate

Air Flow Meter PCE-WSAC 50-310

US$ 570.00

ex. VAT, ex. delivery costs

The Air Flow Meter PCE-WSAC 50-310 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.

Wind measuring device with adjustable alarms
2 alarm types
Supply voltage: 24 V DC
Input signal: 4 … 20 mA
Sensor supply via evaluation device
Degree of protection: IP66
Incl. ISO calibration certificate

Air Velocity Meter PCE-WSAC 50-310

US$ 570.00

ex. VAT, ex. delivery costs

The Air Velocity Meter PCE-WSAC 50-310 can be used in different fields of application. In use, the air velocity meter carries out measurements from the smallest wind movements. The air velocity meter can be used to monitor and alert on the current wind speed.

Wind measuring device with adjustable alarms
2 alarm types
Supply voltage: 24 V DC
Input signal: 4 … 20 mA
Sensor supply via evaluation device
Degree of protection: IP66
Incl. ISO calibration certificate

EV Test Instrument PCE-EVSE 310+

US$ 562.00

ex. VAT, ex. delivery costs

The EV test instrument is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.

- PE pre-test

- Proximity-Pilot PP / Control-Pilot CP

- Simulation CP error "E" / PE error

- Mains socket for measuring purposes

- Safety measuring sockets

- incl. type 2 plug and adapter to type 1

Air Quality Station PCE-WSAC 50-310

US$ 570.00

ex. VAT, ex. delivery costs

The Air Quality Station can be used in different fields of application. In use, the Air Quality Station carries out measurements from the smallest wind movements. The Air Quality Station can be used to monitor and alert on the current wind speed.

Wind measuring device with adjustable alarms
2 alarm types
Supply voltage: 24 V DC
Input signal: 4 … 20 mA
Sensor supply via evaluation device
Degree of protection: IP66
Incl. ISO calibration certificate

Car Measuring Device PCE-EVSE 310+

US$ 562.00

ex. VAT, ex. delivery costs

The Car Measuring Device is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.

- PE pre-test

- Proximity-Pilot PP / Control-Pilot CP

- Simulation CP error "E" / PE error

- Mains socket for measuring purposes

- Safety measuring sockets
- incl. type 2 plug and adapter to type 1

Electric Vehicle EVSE Tester PCE-EVSE 310+

US$ 562.00

ex. VAT, ex. delivery costs

The electric vehicle EVSE tester is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.

- PE pre-test

- Proximity-Pilot PP / Control-Pilot CP

- Simulation CP error "E" / PE error

- Mains socket for measuring purposes

- Safety measuring sockets

- incl. type 2 plug and adapter to type 1

Counting Scale PCE-DMS 310-ICA Incl. ISO Calibration Certificate

US$ 519.00

ex. VAT, ex. delivery costs

These counting scales were specially designed for the measurement of basis weight. Thanks to this counting scale, basis weight measurements can be carried out and evaluated within a very short time.

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use
Incl. ISO calibration certificate

GSM Balance PCE-DMS 310-ICA Incl. ISO Calibration Certificate

US$ 519.00

ex. VAT, ex. delivery costs

This GSM Balance was specially designed for the measurement of basis weight. Thanks to this GSM Balance, basis weight measurements can be carried out and evaluated within a very short time.

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use
Incl. ISO calibration certificate

Laboratory Balance PCE-DMS 310-ICA Incl. ISO Calibration Certificate

US$ 519.00

ex. VAT, ex. delivery costs

These laboratory balance scales were specially designed for the measurement of basis weight. Thanks to this laboratory balance scale, basis weight measurements can be carried out and evaluated within a very short time.

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use
Incl. ISO calibration certificate

Laboratory Scale PCE-DMS 310-ICA Incl. ISO Calibration Certificate

US$ 519.00

ex. VAT, ex. delivery costs

These laboratory scales were specially designed for the measurement of basis weight. Thanks to this laboratory scale, basis weight measurements can be carried out and evaluated within a very short time.

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use
Incl. ISO calibration certificate

Paper Scale PCE-DMS 310-ICA Incl. ISO Calibration Certificate

US$ 519.00

ex. VAT, ex. delivery costs

These paper scales were specially designed for the measurement of basis weight. Thanks to this paper scale, basis weight measurements can be carried out and evaluated within a very short time.

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use
Incl. ISO calibration certificate

Quadrant Scale PCE-DMS 310-ICA Incl. ISO Calibration Certificate

US$ 519.00

ex. VAT, ex. delivery costs

These quandrant scales were specially designed for the measurement of basis weight. Thanks to this quadrant scale, basis weight measurements can be carried out and evaluated within a very short time.

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use
Incl. ISO calibration certificate

Tabletop Scale PCE-DMS 310-ICA Incl. ISO Calibration Certificate

US$ 519.00

ex. VAT, ex. delivery costs

These tabletop scales were specially designed for the measurement of basis weight. Thanks to this tabletop scale, basis weight measurements can be carried out and evaluated within a very short time.

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use
Incl. ISO calibration certificate

Counting Scale PCE-DMS 310

US$ 379.00

ex. VAT, ex. delivery costs

These counting scales were specially designed for the measurement of basis weight. Thanks to this counting scale, basis weight measurements can be carried out and evaluated within a very short time.

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use

GSM Balance PCE-DMS 310

US$ 379.00

ex. VAT, ex. delivery costs

This GSM Balance was specially designed for the measurement of basis weight. Thanks to this GSM Balance, basis weight measurements can be carried out and evaluated within a very short time.

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use

Laboratory Scale PCE-DMS 310

US$ 379.00

ex. VAT, ex. delivery costs

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use

Laboratory Balance PCE-DMS 310

US$ 379.00

ex. VAT, ex. delivery costs

Measuring range: 0 … 310 g / 0 … 31,000 g / m²
Resolution: 0.01 g / 1 g / m²
RS-232 interface
Piece counting function, weight per unit area
Battery operation for mobile use