Force Sensor PCE-C-R10LFC series 5-100 kg
US$ 242.00
ex. VAT, ex. delivery costs

Thanks to its small dimensions, the miniature force sensor is easy to use on hard-to-reach measuring points. The height in particular is something special with this force sensor. With a diameter of only 10 mm, this force sensor is smaller in diameter than a 1 cent coin.

  • Rated load / force F.S.: 5-100 kg / 50-1000 N
  • Limit load / force: 120 %
  • Breaking load / force: 150 %
  • Rated output: 1.0 – 1.5 mV/V
  • Force sensor nominal load selectable!

Force Sensor PCE-C-R13LFC-H7 series 5-100 kg
US$ 242.00
ex. VAT, ex. delivery costs

A force sensor made of stainless steel with a measurement uncertainty of only 0.5%. With the dimensions of Ø 13 mm and a height of 7 mm, the force sensor is very versatile. 

  • Rated load / force F.S.: 5-100 kg / 50-1000 N
  • Limit load / force: 120 %
  • Breaking load / force: 150 %
  • Rated output: 1.0 – 1.5 mV/V
  • Force sensor nominal load selectable!

Force Sensor PCE-C-R19LFC
US$ 242.00
ex. VAT, ex. delivery costs

This is a pressure cell as a force sensor with a high measuring range with small dimensions. The dimensions of the force sensor are only 9 mm in height and 19 mm in diameter. 

  • Rated load / force F.S.: 5-500 kg / 50-5000N
  • Limit load / force: 120 %
  • Breaking load / force: 150 %
  • Rated output: 1.0 – 1.5 mV/V
  • Force sensor nominal load selectable!

Force Sensor PCE-C-R8LFC series 10-50 kg
US$ 242.00
ex. VAT, ex. delivery costs

The miniature force sensor can be used in many applications due to its compact dimensions. With a small force application surface, the miniature force transducer enables force measurement at small contact surfaces.

  • Rated load / force F.S.: 10-50 kg / 100-500 N
  • Limit load / force: 150 %
  • Breaking load / force: 200 %
  • Rated output: 1.0 – 1.5 mV/V
  • Force sensor nominal load selectable!

Conductivity Meter PCE-CM 41
US$ 241.00
ex. VAT, ex. delivery costs

With our conductivity meter PCE-CM 41 it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. Our conductivity meter PCE-CM 41 is very easy to carry everywhere thanks to its small size. Auto ranges up to 20,000 PPM.


  • EC conductivity: 0…2,000 µS/cm  /  0…20 mS/cm
  • Salt content TDS: 0…2,000 mg/l (ppm)  /  20,000 mg/l (ppm)
  • Temperature: 0.0…60 °C / 32 … 140 °F
  • Water resistant (IP 67)

Salt Meter PCE-CM 41
US$ 241.00
ex. VAT, ex. delivery costs

Salt meter for EC and TDS (amount of salts and dissolved solid materials). Auto ranges up to 20,000 PPM.


  • EC conductivity: 0…2000 µS/cm  /  0…20 mS/cm
  • Salt content TDS: 0…2000 mg/l (ppm)  /  20,000 mg/l (PPM)
  • Temperature: 0.0 … 60 °C / 32 … 140 °F
  • Water resistant (IP 67)

Water Analysis Meter PCE-CM 41
US$ 241.00
ex. VAT, ex. delivery costs

With the Water Analysis Meter PCE-CM 41, it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. The Conductivity Tester is very easy to carry everywhere thanks to its small size.


  • EC conductivity: 0…2000 µS/cm  /  0…20 mS/cm
  • Salt content TDS: 0…2000 mg/l (ppm)  /  20000 mg/l (ppm)
  • Temperature: 0.0 … 60 °C / 32 … 140 °F
  • Water resistant (IP 67)

Differential Pressure Meter PCE-PME 250
US$ 240.00
ex. VAT, ex. delivery costs
The digital Differential Pressure Meter is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The Differential Pressure Meter is suitable for measuring non-aggressive and non-explosive gases.

  • measurement range -250 ... +250 kPa (-2.5 ... +2.5 bar)
  • resolution 0.01 kPa
  • accuracy: ±1 % FS
  • MAX, MIN, AVG value, HOLD
  • audible alarm
  • 13 selectable pressure units
  • USB-C with data transfer
  • PC software
Digital Multimeter PCE-IT 200
US$ 240.00
ex. VAT, ex. delivery costs
Our compact digital multimeter is perfect for measuring the insulation resistance of electrical devices and household appliances. With its ability to measure insulation resistance, AC voltage, low resistance, PI (polarization index) and DAR (dielectric absorption), the digital multimeter is a versatile and reliable measuring tool for many application scenarios.

  • Insulation resistance up to 5.5 GΩ
  • Accuracy ±5% of Mw. ±3 digits (over100 kΩ)
  • Direct and alternating voltages 30 …600 V
  • Resistance 0 … 999 Ω
  • PI (polarization index)
  • DAR (dielectric absorption)
  • Power supply via battery or mains adapter
Electrical Tester PCE-IT 200
US$ 240.00
ex. VAT, ex. delivery costs
Our compact electrical tester is perfect for measuring the insulation resistance of electrical devices and household appliances. With its ability to measure insulation resistance, AC voltage, low resistance, PI (polarization index) and DAR (dielectric absorption), the electrical tester is a versatile and reliable measuring tool for many application scenarios.

  • Insulation resistance up to 5.5 GΩ
  • Accuracy ±5% of Mw. ±3 digits (over100 kΩ)
  • Direct and alternating voltages 30 …600 V
  • Resistance 0 … 999 Ω
  • PI (polarization index)
  • DAR (dielectric absorption)
  • Power supply via battery or mains adapter
Environmental Meter PCE-RAM 8
US$ 240.00
ex. VAT, ex. delivery costs
The environmental meter is a high-precision instrument developed for the detection of gamma, beta and X-rays. With its sensitive detection technology, it enables reliable measurement and monitoring of the radiation environment. Dose measurement is a central aspect of the radiation meter.

  • γ-, β-, X- radiation
  • Resolution: 0.01 µSv/h
  • Dose measurement
  • Display in µSv/h and µR/h
  • Accumulated radiation measurement
  • Adjustable acoustic alarm
  • Battery operation
Environmental Tester PCE-RAM 8
US$ 240.00
ex. VAT, ex. delivery costs
The environmental tester is a high-precision instrument developed for the detection of gamma, beta and X-rays. With its sensitive detection technology, it enables reliable measurement and monitoring of the radiation environment. Dose measurement is a central aspect of the radiation meter.

  • γ-, β-, X- radiation
  • Resolution: 0.01 µSv/h
  • Dose measurement
  • Display in µSv/h and µR/h
  • Accumulated radiation measurement
  • Adjustable acoustic alarm
  • Battery operation
Geiger Counter PCE-RAM 8
US$ 240.00
ex. VAT, ex. delivery costs
The geiger counter is a high-precision instrument developed for the detection of gamma, beta and X-rays. With its sensitive detection technology, it enables reliable measurement and monitoring of the radiation environment. Dose measurement is a central aspect of the radiation meter.

  • γ-, β-, X- radiation
  • Resolution: 0.01 µSv/h
  • Dose measurement
  • Display in µSv/h and µR/h
  • Accumulated radiation measurement
  • Adjustable acoustic alarm
  • Battery operation
HVAC Meter / HVACR Tester PCE-PME 250
US$ 240.00
ex. VAT, ex. delivery costs
The digital HVAC Meter / HVACR Tester is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The HVAC Meter / HVACR Tester is suitable for measuring non-aggressive and non-explosive gases.

  • measurement range -250 ... +250 kPa (-2.5 ... +2.5 bar)
  • resolution 0.01 kPa
  • accuracy: ±1 % FS
  • MAX, MIN, AVG value, HOLD
  • audible alarm
  • 13 selectable pressure units
  • USB-C with data transfer
  • PC software
Insulation Tester PCE-IT 200
US$ 240.00
ex. VAT, ex. delivery costs
Our compact insulation tester is perfect for measuring the insulation resistance of electrical devices and household appliances. With its ability to measure insulation resistance, AC voltage, low resistance, PI (polarization index) and DAR (dielectric absorption), the insulation tester is a versatile and reliable measuring tool for many application scenarios.

  • Insulation resistance up to 5.5 GΩ
  • Accuracy ±5% of Mw. ±3 digits (over100 kΩ)
  • Direct and alternating voltages 30 …600 V
  • Resistance 0 … 999 Ω
  • PI (polarization index)
  • DAR (dielectric absorption)
  • Power supply via battery or mains adapter
Isolation Meter PCE-IT 200
US$ 240.00
ex. VAT, ex. delivery costs
Our compact isolation meter  is perfect for measuring the insulation resistance of electrical devices and household appliances. With its ability to measure insulation resistance, AC voltage, low resistance, PI (polarization index) and DAR (dielectric absorption), the isolation meter  is a versatile and reliable measuring tool for many application scenarios.

  • Insulation resistance up to 5.5 GΩ
  • Accuracy ±5% of Mw. ±3 digits (over100 kΩ)
  • Direct and alternating voltages 30 …600 V
  • Resistance 0 … 999 Ω
  • PI (polarization index)
  • DAR (dielectric absorption)
  • Power supply via battery or mains adapter
Manometer PCE-PME 250
US$ 240.00
ex. VAT, ex. delivery costs
The digital Manometer is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The Manometer is suitable for measuring non-aggressive and non-explosive gases.

  • measurement range -250 ... +250 kPa (-2.5 ... +2.5 bar)
  • resolution 0.01 kPa
  • accuracy: ±1 % FS
  • MAX, MIN, AVG value, HOLD
  • audible alarm
  • 13 selectable pressure units
  • USB-C with data transfer
  • PC software
Pressure Gauge PCE-PME 250
US$ 240.00
ex. VAT, ex. delivery costs
The digital Pressure Gauge is an accurate and compact meter for differential pressure measurement in a wide range of applications, such as measuring filter resistances, pressure in furnaces, orifices, gas-air ratio equalisation, combustion processes, air conditioning systems, ventilation systems, etc. The Pressure Gauge is suitable for measuring non-aggressive and non-explosive gases.

  • measurement range -250 ... +250 kPa (-2.5 ... +2.5 bar)
  • resolution 0.01 kPa
  • accuracy: ±1 % FS
  • MAX, MIN, AVG value, HOLD
  • audible alarm
  • 13 selectable pressure units
  • USB-C with data transfer
  • PC software