Digital Thermometer

Digital Thermometer PCE-HWA 30
US$ 368.00
ex. VAT, ex. delivery costs

The digital thermometer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the digital thermometer can measure the volume flow and the ambient temperature.

  • Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
  • Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
  • Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
  • Data memory for 960 measured values
  • Wind speed
  • Volume flow
  • Temperature measurement

Digital Thermometer PCE-JR 911-ICA incl. ISO Calibration Certificate
US$ 706.00
ex. VAT, ex. delivery costs
ISO Calibration

With the digital thermometer you get a measuring device with which you can perform a wide range of measuring tasks. On the one hand, you can directly measure and read the temperature of bodies without contact, on the other hand you can also save the measured values internally in the data logger and transfer them to a PC or laptop via the RS-232 interface.

  • Range: -40 … +500 °C / -40 … 932 °F
  • Resolution: 0.1 °C / 0.18 °F
  • Accuracy: ±2%
  • Memory: 4 x 99 values
  • E-factor: 0.3 … 1.0 (adjustable)
  • incl. software and RS-232 cable
  • incl. ISO calibration certificate

Digital Thermometer PCE-HWA 30-ICA incl. ISO Calibration Certificate
US$ 561.00
ex. VAT, ex. delivery costs
ISO Calibration

The digital thermometer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the digital thermometer can measure the volume flow and the ambient temperature.

  • Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
  • Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
  • Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
  • Data memory for 960 measured values
  • Wind speed
  • Volume flow
  • Temperature measurement
  • incl. ISO Calibration Certificate (wind speed function only)

Digital Thermometer PCE-T 394
US$ 214.00
ex. VAT, ex. delivery costs
The digital thermometer offers precise temperature monitoring of multiple measuring points. With a measuring range of -210 to 1370 °C and support for thermocouple types K and J, it enables accurate measurements in different environments. The 4 input channels of the digital thermometer enable simultaneous monitoring of multiple measuring points, making this 4-channel thermometer ideal for complex applications.

  • Measuring range -210 … 1370 °C
  • Resolution: 0.1 °C/ <1000, 1 °C >1000,
  • Accuracy: ±0.2 % of Mw.+1 °C above -100 °C
  • Thermocouple types K and J
  • 4 input channels
  • Memory for 32000 data records
  • Incl. software
Digital Thermometer PCE-T 394-ICA incl. ISO-calibration certificate
US$ 294.00
ex. VAT, ex. delivery costs
ISO Calibration
The digital thermometer offers precise temperature monitoring of multiple measuring points. With a measuring range of -210 to 1370 °C and support for thermocouple types K and J, it enables accurate measurements in different environments. The 4 input channels of the digital thermometer enable simultaneous monitoring of multiple measuring points, making this 4-channel thermometer ideal for complex applications.

  • Measuring range -210 … 1370 °C
  • Resolution: 0.1 °C/ <1000, 1 °C >1000,
  • Accuracy: ±0.2 % of Mw.+1 °C above -100 °C
  • Thermocouple types K and J
  • 4 input channels
  • Memory for 32000 data records
  • incl. software
    incl. ISO-calibration certificate
Digital Thermometer PCE-FWS 20N-2
US$ 358.00
ex. VAT, ex. delivery costs

This digital thermometer with outside sensor is a real all-rounder. The wireless digital thermometer with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless digital thermometer and outside sensors. The weather data of the digital thermometer with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


  • 3 displays
  • Indoor temperature in Celsius or Fahrenheit
  • Outside temperature in Celsius or Fahrenheit
  • Indoor air humidity / outdoor air humidity
  • Air pressure gauge in inHg or hPa
  • Absolute or relative air pressure display selectable
  • Precipitation indication in mm or inch
  • Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
  • Wind speed in mph, km/h, m/s, knots …
  • Wind direction indicator
  • Wind chill temperature gauge
  • Weather forecast, trend indicator, storm warning
  • and much more…

Digital Thermometer PCE-895-ICA incl. ISO Calibration Certificate
US$ 1,026.00
ex. VAT, ex. delivery costs
ISO Calibration

The digital thermometer is used for fast surface temperature measurement. The two laser points of the digital thermometer PCE-895-ICA mark the exact measuring point and thus offer excellent assistance with the temperature measurement.

  • Temperature measurement up to 1600°C / 2912°F
  • Cross laser thermometer
  • K-Type or infrared measurement
  • Optical resolution: 60:1
  • Adjustable emissivity
  • Suitable for long-term measurements
  • Incl. ISO Calibration Certificate

Digital Thermometer PCE-EMD 5
US$ 1,052.00
ex. VAT, ex. delivery costs
The digital thermometer can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 0.0 … 50.0 °C and the humidity measuring range is 0.0… 99.9% RH.

  • Temperature measuring range: 0.0 … 50.0 °C
  • Humidity measuring range: 0.0 … 99.9% RH
  • Connection of up to four external sensors
  • Analog 4 … 20 mA input signal
  • Wall mounting
Digital Thermometer PCE-EMD 5-ICA incl. ISO Calibration Certificate
US$ 1,320.00
ex. VAT, ex. delivery costs
ISO Calibration
The digital thermometer can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 0.0 … 50.0 °C and the humidity measuring range is 0.0… 99.9% RH.

  • Temperature measuring range: 0.0 … 50.0 °C
  • Humidity measuring range: 0.0 … 99.9% RH
  • Connection of up to four external sensors
  • Analog 4 … 20 mA input signal
  • Wall mounting
  • incl. ISO Calibration Certificate
Digital Thermometer PCE-313A-ICA incl. ISO Calibration Certificate
US$ 603.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-313A Digital Thermometer measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A Digital Thermometer can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Digital Thermometer to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.


  • Relative humidity: 5 … 95% r.H.
  • Temperature: 0 … 50°C / 32 … 122°F
  • Type K: -50 … 1300°C / -58 … 2372°F
  • Calculated dew point: -25.3 … 48.9°C / -13.5 … 120°F
  • Wet bulb temperature: -21 … 50°C / -5.8 … 122°F
  • Memory: SD card (1 … 16 GB)
  • Incl. ISO Calibration Certificate

Digital Thermometer PCE-HPT 1
US$ 630.00
ex. VAT, ex. delivery costs

The digital thermometer is a highly accurate 1-channel temperature measuring device. The digital thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

  • Measuring range: -100 … +400 °C / -148 … 752 °F
  • Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 … 82.4 °F) device only
  • Resolution: 0.01 °C / 0.018 °F
  • PT-100 sensor

Digital Multimeter PCE-VA 20
US$ 385.00
ex. VAT, ex. delivery costs

PCE-VA 20 is a Digital Multimeter for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.


  • Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
  • Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
  • Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
  • Resolution: 0.1

Digital Thermometer PCE-895
US$ 880.00
ex. VAT, ex. delivery costs

The dual infrared digital thermometer is used for fast surface temperature measurement. The two laser points of the infrared digital thermometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement. 

  • Temperature measurement up to 1600°C / 2912°F
  • Cross laser thermometer
  • K-Type or infrared measurement
  • Optical resolution: 60:1- Adjustable emissivity
  •  Can be calibrated
  •  Suitable for long-term measurements

Multifunction Digital Thermometer PCE-THA 10-ICA incl. ISO Calibration Cert.
US$ 420.00
ex. VAT, ex. delivery costs
ISO Calibration

The Multifunction Digital Thermometer PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the temperature, the digital thermometer measures the wind speed, humidity, dew point, the wet bulb temperature and the air volume. Average wind speed values can be determined with the anemometer from the 20 preset points.


- Temperature measuring range: -15 ... 50°C / 5 ... 122°F
- Humidity range: 5 ... 95% RH
- Air speed: 0.4 ... 35 m / s
- Air flow: 0 ... 9.999 m3 / s
- Incl. ISO Calibration Certificate

Digital Multimeter PCE-VA 20-ICA incl. ISO Calibration Certificate
US$ 628.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-VA 20 is a versatile Digital Multimeter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.


  • Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
  • Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
  • Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±  (3% of measured value + 0.3 m/s) when more than 20 m/s
  • Resolution: 0.1
  • Incl. ISO Calibration Certificate

Digital Multimeter Flow Hoods PCE-VA 20-SET-ICA incl. ISO Calibration
US$ 800.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-VA 20-SET is a multi-functional wind measurer including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.


  • Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
  • Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
  • Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
  • Resolution: 0.1°C / 0.18°F
  • Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
  • incl. ISO Calibration Certificate

Digital Thermometer PCE-ST 2
US$ 30.00
ex. VAT, ex. delivery costs
No-Shopping
The digital thermometer allows you to check the temperature quickly and is also lightweight and ergonomically shaped to make measuring as comfortable as possible. The temperature probe of the rod thermometer is made of stainless steel and is ideally suited for food.

  • Measuring range: -40 … 300 °C
  • Stainless steel temperature sensor 120 mm
  • Foldable sensor
  • Max / Min / Hold function
  • Magnetic holder
  • LED light
  • Automatic display alignment
  • IP54
Digital Thermometer PCE-ST 1
US$ 38.00
ex. VAT, ex. delivery costs
No-Shopping

The PCE-ST 1 Digital Thermometer is a handheld digital device to measure temperature in the food sector, as for instance in meat, sausage, cheese, tomatoes, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The Digital Thermometer is very easy to use, with small dimensions and short response time.


  • Measuring range:  -40 … 250°C / -40 … 482°F
  • Indication of max. and min. values
  • Data function
  • Lock for continuous operation
  • Measured value in ºC or ºF