Locating Device

With certain models of locating device you can locate open power cables, either live or without current, up to 300V. A locating device can locate cables, circuits, short circuits and ground. To perform these functions, it is not necessary to disconnect electrically sensitive devices or to disconnect the power to the cable being tested.

The locating device can also locate ferrous and non-ferrous metals, wood and plastic with a level of accuracy. The locating device provides a safe way to test wall sockets for which no plans or information is available about the cables and their output; the locating device is also very viable in that it allows for quick and safe operation when holes are required to be made in walls, ceilings and floors.

If you have any queries, please contact us at or +1 (561) 320-9162.

BTU Meter / Clamp on Heat meter PCE-TDS+ 200 SML

US$ 5,148.00

ex. VAT, ex. delivery costs

The BTU Meter / Clamp on Heat meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

Measuring range: ±32 m/s
Resolution: 0.001 m/s
incl. 4 sensors
Pipe size:
DN 20 … 108 mm / 50 … 700 mm / DN 315 … 6000 mm
Temperature resistance: -30 … 160 °C
for different media
for different pipe materials
Measuring parameters: Flow velocity,
volume flow and volume
Interface: USB
Data logger: 10 million measuring points
LiPo battery

Pipe Locator PCE-191 CB

US$ 132.00

ex. VAT, ex. delivery costs

PCE-191 CB is a handheld, portable wire tracer, Pipe Locator or cable fault meter used for locating wires and cables hidden behind walls and insulation.

Power range: 220 to 240 V AC
Frequency range: 50 / 60 Hz
Acoustic alarm

Locating Device PCE-CL 20

US$ 396.00

ex. VAT, ex. delivery costs

PCE-CL 20 is a cable locating device used to detect live and voltage-free electrical wires. This cable detector also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.

Output signal: 125 kHz
Compatible with one- or two-pole circuits
Automatic, manual and UAC measuring modes

BTU Meter / Clamp on Heat meter PCE-TDS 200+ M

US$ 3,894.00

ex. VAT, ex. delivery costs

The BTU Meter / Clamp on Heat meter has a measuring range of ±32 m/s. To perform flow measurement with the BTU Meter / Clamp on Heat meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameters DN 50 … 700 / 57 … 720 mm
Temperature resistance: -30 … 160 °C
Temperature measurement up to 1800 °C
for different media
for different pipe materials
Measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)
LiPo battery

BTU Meter / Clamp on Heat meter PCE-TDS 200+ S

US$ 3,894.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0.001 m/s
Pipe size: DN 15 … 100 / 20 … 108 mm
Sensor dimensions: 91 x 52 x 44 mm
Temperature measurement up to 1800 °C
for different media
for different pipe materials
Measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 10 million measuring points
LiPo battery

BTU Meter / Clamp on Heat meterPCE-TDS 200+ L

US$ 4,026.00

ex. VAT, ex. delivery costs

The BTU Meter / Clamp on Heat meterhas a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameter DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
Temperature measurement up to 1800 °C
for different media
for different pipe materials
measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)
LiPo battery

BTU Meter / Clamp on Heat meter PCE-TDS 200+ S-SW-KIT incl. software

US$ 4,052.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0.001 m/s
Pipe size: DN 15 … 100 / 20 … 108 mm
Sensor dimensions: 91 x 52 x 44 mm
Temperature measurement up to 1800 °C
for different media
for different pipe materials
Measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 10 million measuring points

LiPo battery
incl. software

BTU Meter / Clamp on Heat meter PCE-TDS 200+ M-ICA incl. ISO Calibration Certificate

US$ 4,270.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameters DN 50 … 700 / 57 … 720 mm
Temperature resistance: -30 … 160 °C
Temperature measurement up to 1800 °C
for different media
for different pipe materials
Measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)

LiPo battery
incl. ISO Calibration Certificate

BTU Meter / Clamp on Heat meter PCE-TDS 200+ S-ICA incl. ISO-Calibration Certificate

US$ 4,270.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameter DN 15 … 100 / 20 … 108 mm
Sensor dimensions: 91 x 52 x 44 mm
Temperature measurement up to 1800 °C
for different media
for different pipe materials
Measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)

LiPo battery
incl. ISO-Calibration Certificate

BTU Meter / Clamp on Heat meter PCE-TDS 200+ L-ICA incl. ISO Calibration Certificate

US$ 4,402.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameter DN 300 … 6000 mm
Sensor dimensions: 91 x 52 x 44 mm
Temperature measurement up to 1800 °C
for different media
for different pipe materials
measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)

LiPo battery
incl. ISO Calibration Certifikcate

BTU Meter / Clamp on Heat meter PCE-TDS 200+ SR-ICA incl. ISO-Calibration Certificate

US$ 4,518.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameters DN 15 … 100 / 20 … 108 mm
Temperature measurement up to 1800 °C
for different media
for different pipe materials
Measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)

LiPo battery
incl. ISO-Calibration Certificate

BTU Meter / Clamp on Heat meter PCE-TDS 200+ MR incl. ISO Calibration Certificate

US$ 4,699.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0.001 m/s
Sensor for pipe diameters DN 50 … 700 / 57 … 720 mm
Temperature resistance: -30 … 160 °C
Temperature measurement up to 1800 °C
for different media
for different pipe materials
Measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)

LiPo battery
incl. ISO Calibration Certificate

BTU Meter / Clamp on Heat meter PCE-TDS 200+ SM-ICA incl. ISO-Calibration Certrificate

US$ 5,042.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0.001 m/s
incl. 4 sensors
Sensor for pipe diameters DN 50 … 700 / 57 … 720 mm, DN 15 … 100 / 20 … 108 mm
Temperature resistance: -30 … 160 °C
Temperature measurement up to 1800 °C
for different media
for different pipe materials
Measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)

LiPo battery
incl. ISO-Calibration Certrificate

BTU Meter / Clamp on Heat meter PCE-TDS 200+ ML-ICA incl. ISO-Calibration Certificate

US$ 5,227.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0,001 m/s
incl. sensor set
Sensor for pipe diameters DN 50 … 700 / 57 … 720 mm, DN 300 … 6000 mm
Temperature resistance: -30 … 160 °C
Temperature measurement up to 1800 °C
for different media
for different pipe materials
Measuring parameters: flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)

LiPo battery
incl. ISO-Calibration Certificate

BTU Meter / Clamp on Heat meter PCE-TDS 200+ SL-ICA incl. ISO Calibration Certificate

US$ 5,227.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0.001 m/s
incl. 4 sensors
Sensor for pipe diameters DN 15 … 100 / 20 … 108 mm, DN 300 … 6000 mm
Temperature measurement up to 1800 °C
for different media
for different pipe materials
measuring parameters: Flow velocity, volume flow, volume
temperature, heat output and heat quantity
Interface: USB
Cost display
Data logger: 32 GB memory capacity (10 million measuring points)

LiPo battery
incl. ISO Calibration Certificate

BTU Meter / Clamp on Heat meter PCE-TDS+ 200 SML-ICA incl. ISO-Calibration Certificate

US$ 6,185.00

ex. VAT, ex. delivery costs

Measuring range: ±32 m/s
Resolution: 0.001 m/s
incl. 4 sensors
Sensor for pipe diameters DN 20-108 mm / 50-700 mm / 315-6000 mm
Temperature resistance: -30 … 160 °C
for different media
for different pipe materials
Measuring parameters: Flow velocity, volume flow and volume
Interface: USB
Data logger: 32 GB memory capacity (10 million measuring points)

LiPo battery
incl. ISO-Calibration Certificate