Technical Support

Technical advice

Monday - Friday
9 am - 5 pm ET

(561) 320-9162

Email:
info@pce-americas.com

2 Years Warrenty 2 Years Warrenty

2-Year Warranty

All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects

  1. You are here:
  2. Home
  3. Measuring Instruments
  4. Voltmeter (DMM)

Voltmeter (DMM)

Voltmeter PCE-HVAC 6
Voltmeter PCE-HVAC 6
US$ 92.00
ex. VAT, ex. delivery costs
The voltmeter was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This voltmeter is ideal for many inspection and maintenance jobs in this area.

  • Current measurement up to 1000 A
  • Cover of the measuring sockets
  • Voltage measurement up to 600V
  • Temperature measurement via 2 thermocouples
Details
Voltmeter PCE-ITM 20
Voltmeter PCE-ITM 20
US$ 508.00
ex. VAT, ex. delivery costs
This Voltmeter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this Voltmeter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.
  • Automatic range selection
  • Capacitancemeasurement
  • Integrated isolation tester
  • Internal memory
  • To IEC 1010, CAT III 1000V, CAT IV 600V
  • Frequency measurement
Details
Voltmeter PCE-LCT 1-ICA incl. ISO Calibration Certificate
Voltmeter PCE-LCT 1-ICA incl. ISO Calibration Certificate
US$ 414.00
ex. VAT, ex. delivery costs
ISO Calibration
With the Voltmeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Voltmeter captures these currents and displays them on the display. 

  • Measurable electrical parameters: AC V, AC A, resistance
  • Clamp diameter: 30 mm
  • Operating temperature: -10 … 50°C / 50 … 122°F
  • Current consumption: 10-mA
  • Incl. ISO calibration certificate
Details
Voltmeter PCE-CBA 10
Voltmeter PCE-CBA 10
US$ 33.00
ex. VAT, ex. delivery costs
The voltmeter PCE-CBA 10 can be used as a car battery tester. To test the battery, the voltmeter can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.

  • For 12V starter batteries
  • Cold start current CCA:  100 … 1700 A
  • Battery capacity:  30 Ah … 100 Ah
  • Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Details
Voltmeter PCE-PI 10
Voltmeter PCE-PI 10
US$ 39.00
ex. VAT, ex. delivery costs
The voltmeter is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the voltmeter is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.

  • Measuring range: 75 … 600V AC
  • 3-phase rotating field detection
  • AC / DC voltage measurement
  • CAT III 600V
Details
Voltmeter PCE-DM 6
Voltmeter PCE-DM 6
US$ 60.00
ex. VAT, ex. delivery costs
Thanks to its handy design, the smart TRMS Voltmeter fits in any pocket like a smartphone and yet is equipped with many advantageous features. It is a versatile meter for DC and AC voltage, resistance, capacitance and frequency measurements. The Voltmeter offers additional functions such as diode test, a hold function and live test.
Measurement parameters:

  • DC voltage: 0 ... 1000 V
  • AC voltage: 0 ... 750 V
  • resistance: 0 ... 60 MΩ
  • capacitance: 0 ... 60 mF
  • frequency: 0 ... 10 MHz
  • safety standard: CAT III 600 V
  • non-contact voltage detection
Details
Voltmeter PCE-DM 7
Voltmeter PCE-DM 7
US$ 66.00
ex. VAT, ex. delivery costs
Our Voltmeter enables precise and reliable measurements in various electrical and electronic applications. The Voltmeter offers exact results for complex AC signals thanks to its true RMS function.
Measurement parameters:

  • DC voltage: 0 ... 999.9 V
  • AC voltage: 0 ... 750 V
  • alternating current: 0 ... 9.999 µA
  • direct current: 0 ... 9.999 A
  • frequency: 0 ... 5 MHz
  • resistance: 0 ... 99.99 Ω
  • capacitance: 0 ... 9.999 nF
  • temperature: -20 ... +1000 °C
  • non-contact voltage detection
  • bar graph
Details
Voltmeter PCE-LT 15
Voltmeter PCE-LT 15
US$ 92.00
ex. VAT, ex. delivery costs
The voltmeter PCE-LT 15 is a combination device which detects configuration errors in the network and can be used as a voltmeter at the same time. Thus, the periphery of a network can be quickly checked with the LAN tester. 

Measuring function:
  • AC voltage: 750V
  • DC voltage: 1000V
  • Resistance: 4 MΩ
  • Continuity test: 400 Ω
  • Electrical safety: CAT III 600V
Details
Voltmeter PCE-DC1
Voltmeter PCE-DC1
US$ 102.00
ex. VAT, ex. delivery costs
No-Shopping

Mini Voltmeter for measuring AC current, AC voltage, DC current and frequency.


  • AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
  • DC current: 200 A / 0.1 A or 100 mA / ±2.8% + 8 digits
  • AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
  • Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

Details
Voltmeter PCE-CBA 20
Voltmeter PCE-CBA 20
US$ 107.00
ex. VAT, ex. delivery costs
No-Shopping

The Voltmeter tests 12V and 24V starter batteries. The voltmeter checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling. 

  • Measurement object:  12V / 24V starter batteries

  • Battery standards: DIN, JIS, EN, SAE

  • Power supply: 9 … 35V DC via test voltage

Details
Voltmeter PCE-CM 3
Voltmeter PCE-CM 3
US$ 119.00
ex. VAT, ex. delivery costs
The voltmeter is used for quick and easy AC measurements. For current measurement, the voltmeter is plugged over the live conductor. The voltmeter is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

  • Digital Multimeters up to 200 A
  • Compact dimensions
  • Robust plastic housing
  • Multimeter functions
  • Safety conditions: IEC1010-1 (2001)                             CAT II 1000V                             CAT III 600V
Details
Voltmeter PCE-LT 12
Voltmeter PCE-LT 12
US$ 130.00
ex. VAT, ex. delivery costs
No-Shopping
The voltmeter is a versatile measuring instrument. In addition to the standard voltage and current measurements, the voltmeter also has a network analysis. With this network analysis, the voltmeter can be used to check, for example, LAN connections for their correct wiring and function.

Measurement function:
  • AC voltage
  • DC voltage
  • AC
  • DC
  • Resistance
  • Diode measurement
  • Continuity test
Details
Voltmeter PCE-OCM 10
Voltmeter PCE-OCM 10
US$ 132.00
ex. VAT, ex. delivery costs
The voltmeter is characterized by the OLED display. The OLED display on this voltmeter allows the display itself to be read in the dark, as it is self-luminous.

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
Details
Clamp Voltmeter PCE-OC 5
Clamp Voltmeter PCE-OC 5
US$ 150.00
ex. VAT, ex. delivery costs
The Clamp Voltmeter is suitable for service technicians, stationary use in repair departments in specialist shops and in laboratories. The Clamp Voltmeter is designed for current measurements up to 400 A AC.
 
- Graphic display of  the measurement signal
- Oscilloscope mode
- memory function
 
Measurement parameters:
- DC voltage
- AC voltage
- AC
- frequency
- resistance
- capacity
- temperature
Details
Voltmeter PCE-OC 15
Voltmeter PCE-OC 15
US$ 150.00
ex. VAT, ex. delivery costs
The Voltmeter is a versatile and universally applicable meter that combines the functions of an Voltmeter and a true RMS multimeter. Our Voltmeter was developed for practical and mobile use and is ideal for troubleshooting thanks to its extensive features.
Measurement parameters:

  • Voltmeter mode
  • DC voltage: 0 ... 999.9 V
  • AC voltage: 0 ... 750 V
  • direct current: 0 ... 10 A
  • alternating current 0 ... 10 A
  • frequency: 40 Hz ... 1 kHz
  • resistance: 0 ... 99.99 MΩ
  • capacitance: 0 ... 99.99 mF
  • temperature: -20 ... +1000 °C
  • graphical display of the measured value
Details
Voltmeter PCE-DC2
Voltmeter PCE-DC2
US$ 154.00
ex. VAT, ex. delivery costs

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.


  • AC / DC current, voltage and resistance measurement
  • 3 2/3-digit LCD display
  • Power supply: 2 x 1.5V AAA battery
  • Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

Details
Voltmeter PCE-DC3
Voltmeter PCE-DC3
US$ 168.00
ex. VAT, ex. delivery costs

This voltmeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this voltmeter.

  • AC/DC current, AC voltage and frequency measurement
  • AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
  • DCA zero point function

Details
Voltmeter PCE-DC 20
Voltmeter PCE-DC 20
US$ 197.00
ex. VAT, ex. delivery costs
The voltmeter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the voltmeter.

Measurement functions
- DC power
- AC power
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
Details

 

 

 

Purchase Advice on Voltage Measuring Devices

A voltmeter is used to measure the DC or AC voltage. PCE Instruments offers a wide range of different measuring instruments for carrying out such tasks.
Basically, the voltage measuring devices may be differentiated as follows: measuring devices that can only perform the voltage measurement or also some that possess other measuring functions, such as current measurement, resistance measurement, diode test, etc. In this case, one speaks not just about a voltage tester but rather about a multimeter. In principle, however, every multimeter is also a voltage measuring device.
This purchase advice shows the basic differences between the voltage measuring devices from our assortment.

The simplest type of voltage measuring device is the two-pole voltage tester. This voltmeter gauge usually consists of two parts, which are held in the left or right hand. On the front part of the voltmeter there are measuring tips needed to measure voltage. This type of the voltage measuring instruments is often used in the trade and in maintenance. The simple design provides a comfortable and fast working with this voltmeter. Frequently, these voltmeters also have a test button for fault current protection facilities.

Another form of voltage measuring devices is a multimeter. In addition to the voltage measuring function, further measurement options are available here, such as current measurement, resistance measurement, capacitance test, diode test, etc. Voltage measuring instruments, which are designed as multimeters, are structurally completely different from a two-pole voltage tester. Here, the test leads are not connected to the voltmeters directly, but changeably attached to the multimeter. Thus, for example, the voltage gauges can be placed on a workbench and the measurement values can be conveniently read, even if an access to the voltage measurement is difficult.

In addition to the multimeters, current clamps can also be used as a voltage measuring device. A basic requirement here is that the current clamp has separate measuring inputs for voltage. When the current clamp is used as a voltage measuring device, it is often the case, that also the measuring functions, such as continuity test, etc. are integrated in the voltmeter.

Should you have further questions about our voltage measuring devices, do not hesitate to contact us.