Products for 'whm 12017 heating mantle'

Temperature Sensor PCE-IR 50-ICA incl. ISO Calibration Certificate

£ 365.00

Price excl. VAT &. delivery
2 year Warranty

With the Temperature Sensor PCE-IR 50-ICA, surface temperatures can measured quickly and easily. The measuring range of the temperature sensor is 0 … 500 °C / 32 … 932 °F. The measured temperature is output as a 4 … 20-mA standard signal which means that the temperature sensor can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

Measurement range: 0 … 500 °C / 32 … 932 °F
Accuracy: ± 1.5 °C or ± 1 %
Optical resolution: 15:1
Output signal: 4 … 20-mA standard signal
For fixed installation (mounting bracket incl.)
incl. ISO Calibration Certificate

Thermo Transducer PCE-IR 50-ICA incl. ISO Calibration Certificate

£ 365.00

Price excl. VAT &. delivery
2 year Warranty

With the Thermo Transducer PCE-IR 50-ICA, surface temperatures can measured quickly and easily. The measuring range of the thermo transducer is 0 … 500 °C / 32 … 932 °F. The measured temperature is output as a 4 … 20-mA standard signal which means that the thermo transducer can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

Measurement range: 0 … 500 °C / 32 … 932 °F
Accuracy: ± 1.5 °C or ± 1 %
Optical resolution: 15:1
Output signal: 4 … 20-mA standard signal
For fixed installation (mounting bracket incl.)
incl. ISO Calibration Certificate

Electric Vehicle EV Tester / EV Test PCE-EVSE-KIT2-ICA incl ISO Cal Certificate

£ 1,305.00

Price excl. VAT &. delivery
2 year Warranty

An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The EV Test Instrumentis specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument.

Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket
incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)

Temperature Sensor PCE-IR 50

£ 245.00

Price excl. VAT &. delivery
2 year Warranty

With the temperature sensor PCE-IR 50, surface temperatures can measured quickly and easily. The measuring range of the temperature sensor is 0 …500 °C / 32 … 932°F. The measured temperature is output as a 4 … 20-mA standard signal which means that the temperature sensor can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

Measurement range: 0 … 500°C / 32 … 932°F
Accuracy: ± 1.5°C or ± 1%
Optical resolution: 15:1
Output signal: 4 … 20-mA standard signal
For fixed installation (mounting bracket incl.)

Thermo Transducer PCE-IR 50

£ 245.00

Price excl. VAT &. delivery
2 year Warranty

With the Thermo Transducer PCE-IR 50, surface temperatures can measured quickly and easily. The measuring range of the thermo transducer is 0 … 500 °C / 32 … 932 °F. The measured temperature is output as a 4 … 20-mA standard signal which means that the thermo transducer can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

Measurement range: 0 … 500 °C / 32 … 932 °F
Accuracy: ± 1.5 °C or ± 1 %
Optical resolution: 15:1
Output signal: 4 … 20-mA standard signal
For fixed installation (mounting bracket incl.)

Electric Vehicle EV Tester / EV Test Instrument PCE-EVSE-KIT2

£ 1,091.00

Price excl. VAT &. delivery
2 year Warranty

The EV Test Instrument is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.

Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket

I/O Module PCE-S4AI

£ 240.00

Price excl. VAT &. delivery
2 year Warranty

The I/O module PCE-SM4AI has 4 analog inputs for process signals, thermometers etc. All inputs from the I/O module are individually programmable. The I/O module is used to provide analog measurement signals in a Modbus network.

4 analog inputs
Modbus RTU slave
2 programmable alarm outputs
USB interface for programming

Force and Weight Indicator PCE-DPD-F2

£ 297.00

Price excl. VAT &. delivery
2 year Warranty

The built-in display is used to indicate the force and weight, which is determined by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the force and weight indicator makes it possible to display the correct weight in mV / V based on the set sensitivity. The force and weight indicator shows the measured values on a 6-digit LED display.

Power supply: 11 … 60V DC / 24/48V AC
Input signal: mV / V for force and weighing sensors
Display: 6 digits, red
Digit height : 14 mm

Panel Meter PCE-DPD-F2

£ 297.00

Price excl. VAT &. delivery
2 year Warranty

The built-in display is used to indicate the force and weight, which is determined by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the panel meter makes it possible to display the correct weight in mV / V based on the set sensitivity. The panel meter shows the measured values on a 6-digit LED display.

Power supply: 11 … 60V DC / 24/48V AC
Input signal: mV / V for force and weighing sensors
Display: 6 digits, red
Digit height : 14 mm

Force and Weight Indicator PCE-DPD-F1

£ 286.00

Price excl. VAT &. delivery
2 year Warranty

The built-in display is used to indicate the force and weight, which is detected by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the force and weight indicator makes it possible to display the correct weight in mV / V based on the set sensitivity. The force and weight indicator shows the measured values on a 6-digit LED display.

Power supply: 85 … 265V AC / DC
Input signal: mV / V for force and weighing sensors
Display: 6 digits, red
Digit height : 14 mm

Panel Meter PCE-DPD-F1

£ 286.00

Price excl. VAT &. delivery
2 year Warranty

The built-in display is used to indicate the force and weight, which is detected by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the panel meter makes it possible to display the correct weight in mV / V based on the set sensitivity. The panel meter shows the measured values on a 6-digit LED display.

Power supply: 85 … 265V AC / DC
Input signal: mV / V for force and weighing sensors
Display: 6 digits, red
Digit height : 14 mm

Current Signal Converter PCE-SCI-U

£ 143.00

Price excl. VAT &. delivery
2 year Warranty

The current signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the current signal converter are completely galvanically isolated.

Over 100 combinations pre-selected
Converts analogue input range
Completely galvanic isolation
Power supply 18 … 265V AC / DC

Current Signal Converter PCE-SCI-U

£ 143.00

Price excl. VAT &. delivery
2 year Warranty

Over 100 combinations pre-selected
Converts analogue input range
Completely galvanic isolation
Power supply 18 … 265V AC / DC

DIN-Rail Measuring Instrument PCE-SCI-U

£ 143.00

Price excl. VAT &. delivery
2 year Warranty

The DIN-Rail measuring instrument converts an analog input signal into a corresponding analog output signal. The input and output signals from the DIN-Rail measuring instrument are completely galvanically isolated.

Over 100 combinations pre-selected
Converts analogue input range
Completely galvanic isolation
Power supply 18 … 265V AC / DC

Temperature Signal Converter PCE-SCI-U

£ 143.00

Price excl. VAT &. delivery
2 year Warranty

The temperature signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the temperature signal converter are completely galvanically isolated.

Over 100 combinations pre-selected
Converts analogue input range
Completely galvanic isolation
Power supply 18 … 265V AC / DC

Thermo Transducer PCE-SCI-U

£ 143.00

Price excl. VAT &. delivery
2 year Warranty

The thermo transducer converts an analog input signal into a corresponding analog output signal. The input and output signals from the thermo transducer are completely galvanically isolated.

Over 100 combinations pre-selected
Converts analogue input range
Completely galvanic isolation
Power supply 18 … 265V AC / DC

Universal Signal Converter PCE-SCI-U

£ 143.00

Price excl. VAT &. delivery
2 year Warranty

The universal signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the universal signal converter are completely galvanically isolated.

Over 100 combinations pre-selected
Converts analogue input range
Completely galvanic isolation
Power supply 18 … 265V AC / DC

Voltage Signal Converter PCE-SCI-U

£ 143.00

Price excl. VAT &. delivery
2 year Warranty

The voltage signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the voltage signal converter are completely galvanically isolated.

Over 100 combinations pre-selected
Converts analogue input range
Completely galvanic isolation
Power supply 18 … 265V AC / DC