Laboratory Technology

PCE-AS1 is an air sampling meter used to assess microbiological pollution and monitor hygiene. Designed for use in hospitals, clean rooms, food, beverage, cosmetics, and pharmaceutical production facilities. The PCE-AS1 air sampler meets the latest requirements for devices used for airborne microbial analysis of bacterial and fungal counts. Rate is 100 lpm or 3.53 cfm with 300 micropores. **Optional ISO lab calibration listed under accessories**

• Accommodates manual adjustment of air volumes from 10 to 6000 liters
• Offers data storage for up to 99 parameters / 2000 measurement records
• Aids in compliance with HACCP, FDA FMSA, USP 797 and ISO 14698-1
• Runs off a rechargeable battery or AC power
• Supports standard Petri dishes of 90 mm / 3.5 in
• Software free as QR image for IOS / Android

An electrostatic measurement is particularly important to check whether surfaces, components or the human body are electrostatically charged. Such electrostatic charges can be detected with the magnetometer.

• Measuring range: ±60 kV DC
• Acoustic signal when the measured value is exceeded
• Temperature and humidity display
• Laser for aligning the measuring device

PCE-CT 65 is a thickness gauge that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.

• Measuring range of 0 … 1350 µm / 0 … 53 mils
• Accuracy of ±2.5 % ±2 µm for 0 … 1000 µm / ±3.5 % for 1000 µm … 1350 µm / ±2 % ±0.08 mils for 0 … 39.3 mils / ±3.5 % for 39.3 mils … 53.1 mils
• Saves up to 1500 measurements to memory

PCE-CT 65 is a thickness gauge that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.

• Measuring range of 0 … 1350 µm / 0 … 53 mils
• Accuracy of ±2.5 % ±2 µm for 0 … 1000 µm / ±3.5 % for 1000 µm … 1350 µm / ±2 % ±0.08 mils for 0 … 39.3 mils / ±3.5 % for 39.3 mils … 53.1 mils
• Saves up to 1500 measurements to memory
• Incl. ISO Calibration Certificate

PCE-CT 5000H is a thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The thickness gauge automatically detects the type of metal to be measured.

• Type F measuring range: 0 … 5000 µm / 0 … 5 mm / 0 … 196 mils
• Type N measuring range: 0 … 3000 µm / 0 … 3 mm / 0 … 118 mils
• Displays measuring units in μm, mm or mils
• Saves up to 2000 measurements to internal memory
• Practical V-groove on the measuring head
• Incl. ISO Calibration Certificate

Ford flow cup meters are used to measure liquids quickly and easily in order to determine their viscosity. However, it must be taken into account that this is only possible with less viscous liquids.

• Measuring range: 214 … 1413 mm²/s
• Ø nozzle: 5 mm
• Material: anodized aluminum and stainless steel
• Standard: International Standard ASTM D1200, D333 and D365

• electric field: 1 ... 1999 V/m
• resolution: 1 V/m
• accuracy: 1 V/m
• magnetic field: 0.01 ... 99.99 µT
• resolution: 0.01 µT
• accuracy: 0.01 µT
• bandwidth: 5 Hz ... 3500 MHz
• alarm threshold: 40 V/m, 4 µT

• pH measurement range: 0 ... 14 pH
• resolution: 0.01 pH
• accuracy: 0.05 pH
• temperature: 0 ... 60 °C / 32 ... 140 °F
• resolution: 0.1 °C / 0.1 °F
• accuracy: 1 °C / 0.1 °F
• automatic calibration
• for aqueous, non-corrosive media

The heating mantle PCE-HM 250 is an auxiliary device, which is used in laboratories. The heating mantle helps to heat or control the temperature of different samples or chemicals in the laboratory. The device has a crocheted net inside, in which you can hang the round bottom flask to heat it.

• Power 150 W
• Operating temperature 0 … +450 °C
• Fast heat-up time
• For round flasks up to 250 ml

The heating mantle PCE-HM 100 is used in applications where samples or liquids must be quickly heated in the laboratory. The flask may have a volume of up to 100 ml and it is placed in the crocheted net of the heating mantle. Here it is heated by the heating elements with a power of 100 W, and the temperature can be continuously adjusted up to 450 °C using the rotary switch on the heating mantle.

• Power 100 W
• Operating temperature 0 … +450 °C
• Fast heat-up time
• For round flasks up to 100 ml