FME is a handheld multifunction moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.

• Measuring range: 5-99% for wood / 0-99% for building materials
• Resolution: 0.1%
• Accuracy: ±0.2%

The air quality meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air quality meter meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

• Measurable particle sizes: PM2.5 / PM10
• Particle sizes: 0.3 / 2.5 µm
• Mass concentration
• Particle counter
• Temperature
• Humidity (RH)
• Flash memory for approx. 12 measurement runs

The Air Velocity Meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The Air Velocity Meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

PCE-WP24 is a humidity detector for wood used to perform noninvasive, nondestructive moisture measurements of wood, timber and other construction or building materials. An ideal tool for assessing everything from lumber to floors and more, this humidity detector uses electromagnetic waves that penetrate approximately 50 mm / 1.96 inches to 60 mm / 2.36 inches deep (depending on substrate) to return a mean-value moisture content percentage.

• Moisture content measuring range: 4% … 60% wood, 0% … 10% building  materials
• Resolution: 0.1%
• Accuracy: ±0.7%

Humidity detector for waste paper. The humidity detector can detect absolute humidity in waste paper in order to determine the exact humidity content in the collection centre or in the paper-making factory. All test instruments come manufacturer calibrated. ISO certification can be ordered as an option.

• Test / Measurement range: 6 … 30 %
• Resolution: 0.1 %
• Accuracy: ±10 % of the measurement value
• Long probes
• Accurate measurement

The air flow meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The air flow meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

PCE-WMH-3 is a portable handheld digital humidity detector used to measure the moisture content of wood. This hammer-style humidity detector features preset characteristic curves for measuring moisture in 270 different wood types.

• Measuring range: 6 … 60 % moisture content
• Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
• Resolution: 0.1 %

The data logger for temperature and humidity is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the data logger for temperature and humidity determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

• Measurable particle sizes: PM2.5 / PM10
• Particle sizes: 0.3 / 2.5 µm
• Mass concentration
• Particle counter
• Temperature
• Humidity (RH)
• Flash memory for approx. 12 measurement runs

The air sampler is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air sampler determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

• Measurable particle sizes: PM2.5 / PM10
• Particle sizes: 0.3 / 2.5 µm
• Mass concentration
• Particle counter
• Temperature
• Humidity (RH)
• Flash memory for approx. 12 measurement runs

PCE-123 is a multifunction calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multifunction calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multifunction calibrator useful in a wide range of applications.

• DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
• DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
• K, J, E, T type thermocouples (°C or °F)
• Frequency: 1 - 62,500 Hz
• Incl. ISO Calibration Certificate

The relative pressure HVAC meter PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this HVAC pressure meter in the range between -100 … 2000 kPa. The relative pressure HVAC meter PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

• Measuring range pressure: -100 … 2000 kPa relative/ -14.5 … 290 PSI
• Resolution: 0.01 kPa, 0.1 kPa
• Accuracy: <± 0.5% of the measuring range
• USB interface
• Data logger
• Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

The environmental meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

• Measurable particle sizes: PM2.5 / PM10
• Particle sizes: 0.3 / 2.5 µm
• Mass concentration
• Particle counter
• Temperature
• Humidity (RH)
• Flash memory for approx. 12 measurement runs

The HVAC meter PCE-PDA 1L is a reliable differential pressure gauge for pressure measurement of gasses in the range of ± 2 kPa. The HVAC meter PCE-PDA 1L has many different pressure measuring functions.

• Measuring range: ± 2000 Pa  / ± 0.29 psi / ± 0.02 bar
• Resolution: 1 Pa / 0.000145 psi / 0.00001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory 
• Data logger and leak test 
• Temperature measurement, flow measurement

The HVAC meter PCE-PDA 100L is a reliable differential pressure gauge for pressure measurement of gases in the range of -100 to +200 kPa. The HVAC meter PCE-PDA 100L has many different pressure measuring functions.

• Measuring range: -100 … 200 kPa / -14.5 …  29 psi / -1 … 2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement

The Absolute Moisture Meter POCE-W3 is designed for professional use in the input control of large amounts of waste paper or containers of paper. The Absolute Moisture Meter can detect absolute humidity in waste paper in order to determine the exact humidity content in the collection centre or in the paper-making factory. All test instruments come manufacturer calibrated. ISO certification can be ordered as an option.

• Test / Measurement range: 6 … 30 %
• Resolution: 0.1 %
• Accuracy: ±10 % of the measurement value
• Long probes
• Accurate measurement

The HVAC meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The HVAC meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable