Products for 'Temperature Transducer KMU 100 '

£ 46.00

Price excl. VAT &. delivery
2 year Warranty

The KMU 100 temperature transducer is designed to detect temperature from Pt100 sensors and transform it into a normalized signal. This temperature sensorimpresses with itscompact dimensions andcan be easily integratedinto almost anysensor.

For Pt100 sensors
Installation in aluminum and stainless steel heads
Powered supply loop (4 - 20 mA)
High accuracy

Closing Force Transducer PCE-4PCFM

£ 10,230.00

Price excl. VAT &. delivery
2 year Warranty

The closing force transducer PCE-4PCFM is a 4-point force gauge that can ensure the optimal clamp force distribution. The closing force transducer is used on device clamps for white and brown goods to avoid damage caused by incorrect force distribution.

Measuring range: 30,000 N / 3,000 kg / 3 t
Resolution: 10N / 1kg
Measurement uncertainty: ±0.5% full scale
Position of the 4 sensors is adjustable
Touch display including printer
Optional: Measurement data storage on USB stick

Air Sampler PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art air sampler enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air sampler is done by an internal pump.

Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
Modbus RTU and MQTT via RS485

Temperature and humidity measurement
Real-time display of clean room class ISO 14644-1

Data Logger PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the data logger is done by an internal pump.

Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
Modbus RTU and MQTT via RS485

Temperature and humidity measurement
Real-time display of clean room class ISO 14644-1

Dust Monitor PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the dust monitor is done by an internal pump.

Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
Modbus RTU and MQTT via RS485

Temperature and humidity measurement
Real-time display of clean room class ISO 14644-1

Particle Counter PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art particle counter enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter is done by an internal pump.

Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
Modbus RTU and MQTT via RS485

Temperature and humidity measurement
Real-time display of clean room class ISO 14644-1

Air Quality Particle Counting PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air quality particle counting is done by an internal pump.

Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
Modbus RTU and MQTT via RS485

Temperature and humidity measurement
Real-time display of clean room class ISO 14644-1

Airborne Particle-Counting Hygiene PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art airborne particle-counting hygiene enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the airborne particle-counting hygiene is done by an internal pump.

Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
Modbus RTU and MQTT via RS485

Temperature and humidity measurement
Real-time display of clean room class ISO 14644-1

Closing Force Transducer FM205/10 for automatic window regulators

£ 3,045.00

Price excl. VAT &. delivery
2 year Warranty

The closing force transducer is an electronic closing force measuring device for power-operated windows in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

Measuring range: 0 … 150 N
Spring stiffness: 10 N/mm
Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
Memory for 100 measurements
Cable length: 1.5 m / 4.9 ft
Lithium polymer battery
Support of relevant standards - 2000/4 EG
incl. ISO calibration certificate

Closing Force Transducer FM205/2 for automatic window regulators

£ 3,045.00

Price excl. VAT &. delivery
2 year Warranty

Measuring range: 0 … 50 N
Spring stiffness: 2 N/mm
Accuracy: +/- 3N (0-100N) or +/- 3% (>100N)
Memory for 100 measurements
Cable length: 1.5 m / 4.9 ft
Lithium polymer battery
incl. ISO calibration certificate

Closing Force Transducer BIA-1 BT for Bus and Train Doors and Sliding Steps

£ 2,982.00

Price excl. VAT &. delivery
2 year Warranty

The BIA-1 BT closing force transducer is a wireless, electronic closing force measuring device for rail vehicle and bus doors and sliding steps. The closing force transducer is a further development of the tried and tested closing force measuring device Original BIA Class 1.

Measuring range: 25 … 310 N
Stiffness: 10 N/mm
Accuracy: +/- 3N or 3% of reading
PC evaluation software PinchPilot
Force Meter App (downloadable from Google Play Store)
Wireless

Norms:
EN14752:2005
VDV 111
VDV 157
2001/85/EC
§ 35 E, paragraph 5 StVZO

ISO calibration certificate

Particle Counter Dust Measuring Device PCE-CPC 100

£ 4,138.00

Price excl. VAT &. delivery
2 year Warranty

The state-of-the-art particle counter dust measuring device enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the particle counter dust measuring device is done by an internal pump.

Real-time measurement from 0.3 μm … 10 μm
Output in particles/28.3L or particles/m³
Visual and audible alarm when threshold value is exceeded
Modbus RTU and MQTT via RS485

Temperature and humidity measurement
Real-time display of clean room class ISO 14644-1

Closing Force Transducer FM200/10 for Sliding roofs, Window lifters, Tailgates

£ 2,759.00

Price excl. VAT &. delivery
2 year Warranty

The force transducer is an electronic closing force measuring device for power-operated windows, sunroofs and tailgates in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry.

Measuring range: up to 300 N
Stiffness: 10 N/mm
Accuracy: +/- 3N or 3% of reading
PC evaluation software PinchPilot
Memory for 100 measurements
Sensor and PC interface
incl. ISO calibration certificate

Closing Force Transducer FM200/20 for Sliding roofs, Window lifters, Tailgates

£ 2,759.00

Price excl. VAT &. delivery
2 year Warranty

Measuring range: up to 300 N
Stiffness: 20 N/mm
Accuracy: +/- 3N or 3% of reading
PC evaluation software PinchPilot
Memory for 100 measurements
Sensor and PC interface

Sensor cable lengths selectable in the accessories
Support of relevant standards – US Standard FMVSS 118
incl. ISO calibration certificate

Closing Force Transducer FM200/65 for Sliding roofs, Window lifters, Tailgates

£ 2,759.00

Price excl. VAT &. delivery
2 year Warranty

Measuring range: up to 300 N
Stiffness: 65 N/mm
Accuracy: +/- 3N or 3% of reading
PC evaluation software PinchPilot
Memory for 100 measurements

Sensor cable lengths selectable in the accessories
Support of relevant standards – US Standard FMVSS 118
incl. ISO calibration certificate

Closing Force Transducer FM100 for Doors and Gates

£ 1,412.00

Price excl. VAT &. delivery
2 year Warranty

The closing force transducer is an electronic closing force measuring device for externally powered doors and gates. Typical use is the final inspection of new systems as well as regular inspections.

Measuring range: 0 … 2000 N
Stiffness: 500 N/mm
Accuracy: +/- 3N or 3% of reading
Data logger unit with LCD display
Professional, comprehensive PC software
Memory for 100 measurements
Standards – EN 12445/12453, EN 60335-2, DIN V 18650, ASR A1.7, etc.
Incl. ISO calibration certificate

Material Tester PCE-UCD 100

£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

The material testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

Measurement range: -1677700 µs to +1677700 µs
Resolution: 0.05 µs
Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
Includes a camera for measuring crack width
Bandwidth: 1 to 500 kHz
Display: 10.1" TFT touchscreen display
Internal storage: 8 GB

Environmental Tester PCE-LMD 100

£ 3,320.00

Price excl. VAT &. delivery
2 year Warranty

The environmental tester is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental tester guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

Measurement range: 0.00 … 50000 cd/m²
Resolution: 0.01 cd/m²
Accuracy class: A in accordance with DIN 5032-7

External sensor with multifunction button
8 GB measured value memory