The thermo-anemometer has a measuring range of up to 0 … 30 m/s. In addition to the velocity, the thermo-anemometer can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.

• Speed: 0.00 … 30.00 m/s / 0.00 … 98.42 ft/s
• Volume flow: 0.0 … 339120.0 m3/h
• Temperature: 0 … 50 °C / 32 … 122 °F
• Telescopic probe length: 210 … 426 mm / 8.2 … 16.7"
• Telescopic probe diameter: 12 mm / 0.47"

The thermo-anemometer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the thermo-anemometer can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement

The thermo-anemometer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the thermo-anemometer can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement
• incl. ISO Calibration Certificate (wind speed function only)

• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 110 ... 230 V AC , 50 / 60 Hz
• ambient temperature -20 ... +70 °C
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger

• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 24 V DC
• ambient temperature -20 ... +70 °C
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger

The anemometer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the anemometer means stormy gusts can also be monitored.

• Measuring range up to 180 km / h
• Input: pulse, analogue (4 … 20-mA) or radio transmission
• 4 … 20-mA analog output
• Supply voltage: 24V DC
• Ambient temperature -20 … 70°C / -4 … 158°F
• units adjustable: km / h, mph, m / s

• Anemometer / Anemometers for all applications, adjustable alarms
• supply voltage: 230 V DC
• input signal: 4...20 mA
• communication: RS485
• data logger
• sensor supply via evaluation unit
• protection class: IP65

• Anemometer / Anemometers for all applications, adjustable alarms
• supply voltage: 24 V DC
• input signal: 4...20 mA
• communication: RS485
• data logger
• sensor supply via evaluation unit
• protection class: IP65

• measurement range: 0 ... 160 km/h
• accuracy: ±0.5 km/h (0 ... 15 km/h); 3% (15 ... 120 km/h)
• 5 m cable with 4-pin M12 connection
• RS485 Modbus RTU communication
• measurement of wind speed and direction
• protection class IP65 for outdoor areas

The pitot pipe anemometer is a reliable differential pressure gauge for pressure measurement of air in the range of ±20 kPa. The Anemometer can be used in combination with various pitot pipes what makes the instrument very useful in air flow measurements of industrial plants.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable