A belt tension meter measures the belt tension of a belt when it is stationary. The maintenance kit includes a vibration accelerometer for checking vibrating parts, machines and systems. It is also possible to measure the surface speed with a tachometer up to 99,999 revolutions per minute.

Belt Tension Meter

• Measurement of the vibration frequency of the belt
• Measuring range: 10 … 900 Hz
• Accuracy: ± (1% of reading + 4 digits)Vibration Meter
• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 inTachometer
• Contactless measurement: 5 … 99,999 rpm
• Contact measurement: 0.5 … 19,999 rpm
• Surface measurement: 0.05 … 1,999.9 m/min

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

• Measurement geometry: 20° / 60° / 85°
• Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
• Range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU

The PCE-PGM 100 NDT tester or gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

• Measurement geometry: 20° / 60° / 85°
• Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
• Range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU

The PCE-PGM 100 Surface Testing works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the Surface Testing emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

• Measurement geometry: 20° / 60° / 85°
• Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
• Measuring range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU 

PCE-TDS 100HS is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in … 4in. Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 … 4")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, (N,W)
• Incl. sensors TDS-S1

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 … 28 in.  Software sold separately - see accessories for details.

• Measuring range: -32 … 32 m/s, -105 … 105 ft/s
• Resolution: 0.0001 m/s, 0.00033 ft/s
• Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
• Sensor temperature range: 0 … 160°C / 32 … 320°F
• Sensor installation: V, Z
• Incl. sensors TDS-M1