The PCE-TG 300-NO2 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO7 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5/90 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Sensor at 90° angle
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO2 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO7 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5/90 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Sensor at 90° angle
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO7 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO2 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5/90 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Sensor at 90° angle
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO2 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO2 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO7 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO2 is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO2 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

• Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
• Diameter: 14 mm / 0.55"
• Minimum diameter of pipes: 30 mm / 1.18"
• Frequency: 2.5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO7 is an Ultrasonic testing device for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the Ultrasonic testing device. Wall thicknesses under a coating can also be measured with the Ultrasonic testing device.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO7 is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO7 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

• Measuring range: 0.65 … 200 mm / 0.025 …  7.87" (steel)
• Diameter: 6 mm / 0.23"
• Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
• Frequency: 7 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5 is a wall thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the wall thickness meter. Wall thicknesses under a coating can also be measured with the wall thickness meter.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate

The PCE-TG 300-NO5/90 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.

• Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
• Diameter: 10mm / 0.39"
• Sensor at 90° angle
• Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
• Frequency: 5 MHz
• Bluetooth
• incl. ISO calibration certificate