A tension dynamometer is based on the principle that the force acting on the pressure adapter is measured hydraulically. The hydraulic pressure generated is displayed by the tension dynamometer on a scale in Newtons.

• Measuring range: 0… 1,000 N / 225 lbs
• Resolution: 20 N / 4.5 lbs
• Measuring accuracy: ±2.5% of the measuring range
• with 100 cm hydraulic hose
• External analogue display

The PCE-HT-75 Concrete Hardness Tester is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This Hardness Tester in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.

• Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
• Measuring range: 10 … 70 N/mm²
• Energy: 0.735 J / 0.54 ft-lbs 
• Low strength concrete testing or Type L
• Indication of measurement: 0 to 100 (without dimensions)
• Maximum thickness of concrete (of the material): 70 cm

The Concrete Rebound Test Hammer PCE-HT-75 for concrete is easy to use and is fundamentally found in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This Concrete Rebound Test Hammer PCE-HT-75 is based on the Swiss principle of measurement.

• Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
• Measuring range: 10 … 70 N/mm²
• Energy: 0.735 J / 0.54 ft-lbs
• Low strength concrete testing
• Indication of measurement: 0 to 100 (without dimensions)
• Maximum thickness of concrete (of the material): 70 cm

The PCE-HT-75 durometer for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This durometer in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.

• Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
• Measuring range: 10 … 70 N/mm²
• Energy: 0.735 J / 0.54 ft-lbs
• Low strength concrete testing or Type L
• Indication of measurement: 0 to 100 (without dimensions)
• Maximum thickness of concrete (of the material): 70 cm

The PCE-HT-75 Material Tester for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This Material Tester in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.

• Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
• Measuring range: 10 … 70 N/mm²
• Energy: 0.735 J / 0.54 ft-lbs
• Low strength concrete testing or Type L
• Indication of measurement: 0 to 100 (without dimensions)
• Maximum thickness of concrete (of the material): 70 cm

The PCE-HT-75 durometer for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This durometer in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.

• Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
• Measuring range: 10 … 70 N/mm²
• Energy: 0.735 J / 0.54 ft-lbs
• Low strength concrete testing or Type L
• Indication of measurement: 0 to 100 (without dimensions)
• Maximum thickness of concrete (of the material): 70 cm

The PCE-HT-75 Surface Testing Hammer for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This Surface Testing Hammer in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.

• Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
• Measuring range: 10 … 70 N/mm²
• Energy: 0.735 J / 0.54 ft-lbs
• Low strength concrete testing or Type L
• Indication of measurement: 0 to 100 (without dimensions)
• Maximum thickness of concrete (of the material): 70 cm

With a resolution of 0.1 mg, this analytical balance is ideally suited for checking small samples for their weight. For example, powder can be weighed with the analytical balance. Typical areas of application for the analytical balance are therefore in laboratories or in research facilities.

• Measuring range: 0 … 220 g
• Resolution: 0.1 mg
• Measurement accuracy: ±0.5 mg
• Windbreak
• RS232 data interface

With a resolution of 0.1 mg, this benchtop scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the benchtop scale. Typical areas of application for the benchtop scale are therefore in laboratories or in research facilities.

• Measuring range: 0 … 220 g
• Resolution: 0.1 mg
• Measurement accuracy: ±0.5 mg
• Windbreak
• RS232 data interface