Skip to main content
  1. You are here:
  2. Home
  3. Products for 'Medidor de grosor de material PCE CT 20 '
Material Tester PCE-CT 80-FN3
Material Tester PCE-CT 80-FN3
£ 790.00
Price excl. VAT &. delivery
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Material Tester PCE-CT 80-FN2
Material Tester PCE-CT 80-FN2
£ 772.00
Price excl. VAT &. delivery
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Material Tester PCE-CT 80-FN2D5
Material Tester PCE-CT 80-FN2D5
£ 783.00
Price excl. VAT &. delivery
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Material Tester PCE-CT 80-F5N3
Material Tester PCE-CT 80-F5N3
£ 799.00
Price excl. VAT &. delivery
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Material Thickness Meter PCE-CT 80-F5N3
Material Thickness Meter PCE-CT 80-F5N3
£ 799.00
Price excl. VAT &. delivery
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Material Thickness Meter PCE-CT 80-FN2
Material Thickness Meter PCE-CT 80-FN2
£ 772.00
Price excl. VAT &. delivery
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Material Thickness Meter PCE-CT 80-FN3
Material Thickness Meter PCE-CT 80-FN3
£ 790.00
Price excl. VAT &. delivery
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Material Thickness Meter PCE-CT 80-FN2D5
Material Thickness Meter PCE-CT 80-FN2D5
£ 783.00
Price excl. VAT &. delivery
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Material Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
Material Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Details
Material Thickness Meter PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
Material Thickness Meter PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 919.00
Price excl. VAT &. delivery
ISO Calibration
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Details
Material Tester PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
Material Tester PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
£ 899.00
Price excl. VAT &. delivery
ISO Calibration
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Details
Material Thickness Meter PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
Material Thickness Meter PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
£ 899.00
Price excl. VAT &. delivery
ISO Calibration
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Details
Material Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate
Material Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate
£ 926.00
Price excl. VAT &. delivery
ISO Calibration
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Details
Material Thickness Meter PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate
Material Thickness Meter PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate
£ 926.00
Price excl. VAT &. delivery
ISO Calibration
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Details
Material Tester PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate
Material Tester PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate
£ 890.00
Price excl. VAT &. delivery
ISO Calibration
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO Calibration Certificate
Details
Material Tester PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate
Material Tester PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate
£ 914.00
Price excl. VAT &. delivery
ISO Calibration
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Details
Material Thickness Meter PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate
Material Thickness Meter PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate
£ 914.00
Price excl. VAT &. delivery
ISO Calibration
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO-Calibration Certificate
Details
Material Thickness Meter PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate
Material Thickness Meter PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate
£ 890.00
Price excl. VAT &. delivery
ISO Calibration
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 1500 µm, NFe: 0 … 1500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
  • incl. ISO Calibration Certificate
Details
Material Tester PCE-2000N
Material Tester PCE-2000N
£ 794.00
Price excl. VAT &. delivery
The PCE Instruments PCE-2000N material tester uses the Leeb rebound method. This is a dynamic hardness test method in which a standardized test specimen, usually a hard metal ball, is hit with defined impact energy on a test surface.

  • Measurement according to Leeb Rebound method
  • Hardness scales: HL (Leeb), HV (Vickers), HB (Brinell), HS (Shore), HRA (Rockwell A), HRB (Rockwell B), HRC (Rockwell C)
  • Measurement Range: 170-960 HLD, 80-1042 HV, 19-683 HB, 30.6-102.6 HS, 59.1-88 HRA, 13.5-101.7 HRB
  • External impact device on 1.5 m / 4.9 ft cable
  • Accuracy: ± 0.5% (@ 800 HLD), Repeatability: 0.8% (@ 800 HLD)
  • Storage data measurements on a USB stick
  • Color display, Measurement in different angles possible, Various other impactors as accessories
Details
Material Tester PCE-2550
Material Tester PCE-2550
£ 788.00
Price excl. VAT &. delivery

Due to its compact design, the PCE-2550 material tester is very easy to use for incoming and outgoing inspections. Due to the adjustable hardness scales, the material tester PCE-2550 is versatile.

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.4%, Repeatability: ± 0.6%
  • Impact Device: Type D
  • Measuring Direction: 360°
  • Internal measured value memory

Details
Material Thickness Meter PCE-TG 300-NO5
Material Thickness Meter PCE-TG 300-NO5
£ 914.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-NO5 is a material thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material thickness meter. Wall thicknesses under a coating can also be measured with the material thickness meter.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth

Details
Material Tester PCE-TG 300-NO5
Material Tester PCE-TG 300-NO5
£ 914.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-NO5 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth

Details
Material Tester PCE-TG 300-NO5/90
Material Tester PCE-TG 300-NO5/90
£ 895.00
Price excl. VAT &. delivery
Wireless

The PCE-TG 300-NO5/90 is a material tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the material tester. Wall thicknesses under a coating can also be measured with the material tester.

  • Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
  • Diameter: 10mm / 0.39"
  • Sensor at 90° angle
  • Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
  • Frequency: 5 MHz
  • Bluetooth

Details
Thickness Gauge PCE-CT 80-FN3
Thickness Gauge PCE-CT 80-FN3
£ 790.00
Price excl. VAT &. delivery
The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Thickness Meter PCE-CT 80-FN3
Thickness Meter PCE-CT 80-FN3
£ 790.00
Price excl. VAT &. delivery
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Thickness Meter PCE-CT 80-FN2D5
Thickness Meter PCE-CT 80-FN2D5
£ 783.00
Price excl. VAT &. delivery
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2500 µm, NFe: 0 … 2500 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Surface Tester PCE-CT 80-FN2
Surface Tester PCE-CT 80-FN2
£ 772.00
Price excl. VAT &. delivery
The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Automotive Tester PCE-CT 80-FN2
Automotive Tester PCE-CT 80-FN2
£ 772.00
Price excl. VAT &. delivery
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Thickness Gauge PCE-CT 80-FN2
Thickness Gauge PCE-CT 80-FN2
£ 772.00
Price excl. VAT &. delivery
The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Thickness Meter PCE-CT 80-FN2
Thickness Meter PCE-CT 80-FN2
£ 772.00
Price excl. VAT &. delivery
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Surface Tester PCE-CT 80-FN3
Surface Tester PCE-CT 80-FN3
£ 790.00
Price excl. VAT &. delivery
The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Thickness Meter PCE-CT 80-F5N3
Thickness Meter PCE-CT 80-F5N3
£ 799.00
Price excl. VAT &. delivery
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Car Measuring Device PCE-CT 80-FN2
Car Measuring Device PCE-CT 80-FN2
£ 772.00
Price excl. VAT &. delivery
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 2000 µm, NFe: 0 … 2000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Automotive Tester PCE-CT 80-FN3
Automotive Tester PCE-CT 80-FN3
£ 790.00
Price excl. VAT &. delivery
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 3000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Car Measuring Device PCE-CT 80-F5N3
Car Measuring Device PCE-CT 80-F5N3
£ 799.00
Price excl. VAT &. delivery
The car measuring device is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the car measuring device, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details
Paint Thickness Tester PCE-CT 80-F5N3
Paint Thickness Tester PCE-CT 80-F5N3
£ 799.00
Price excl. VAT &. delivery
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 5000 µm, NFe: 0 … 3000 µm
  • Accuracy after foil calibration: ±(2% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Details