Cable Fault Meter

Cable Fault Meter PCE-160 CB
£ 8.00
Price excl. VAT &. delivery
2 year Warranty
No-Shopping
The PCE-160 CT cable fault meter is a line locator for hard-to-reach cables and is used, for example, in the automotive sector. In addition to the line location, there is also the continuity test with the cable fault meter.

  • Sensitivity adjustment
  • Headphone jack
  • Different beeps
  • Cable tracking in walls and cable channels
  • For mobile use
Cable Fault Meter PCE-LT 12
£ 53.00
Price excl. VAT &. delivery
2 year Warranty
No-Shopping
The cable fault meter is a versatile measuring instrument. In addition to the standard voltage and current measurements, the cable fault meter also has a network analysis. With this network analysis, the cable fault meter can be used to check, for example, LAN connections for their correct wiring and function.

Measurement function:
  • AC voltage
  • DC voltage
  • AC
  • DC
  • Resistance
  • Diode measurement
  • Continuity test
Cable Fault Meter PCE-191 CB
£ 89.00
Price excl. VAT &. delivery
2 year Warranty

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation.


  • Power range: 220 to 240 V AC
  • Frequency range: 50 / 60 Hz
  • Acoustic alarm 

Cable Fault Meter PCE-180 CBN
£ 120.00
Price excl. VAT &. delivery
2 year Warranty
No-Shopping

PCE-180 CBN is a handheld, portable, battery-powered wire tracer or cable locator that consists of an amplifier probe and acoustic signal or tone generator. This locating device is designed to detect wires or cables hidden behind walls or insulation.


  • Uses an acoustic signal to detect wires and cables, including  network and coaxial cables
  • Features a 3-position toggle switch (and 3-color LED) for line  polarity, continuity and voltage testing
  • Comes with red and black test leads with alligator clips 

Cable Fault Meter PCE-CLT 10
£ 156.00
Price excl. VAT &. delivery
2 year Warranty

The cable fault meter PCE-CLT 10 is a multifunctional device which enables high accuracy and fast measurement results. If used appropriately, the cable fault meter can be used to measure cables that have already been installed and are still to be installed.

  • Measuring range cable length: 5 … 3000 m / 16.4 … 9842.5 ft
  • Measurement Units: m, ft
  • Resolution: 0.1 m / 0.3 ft
  • Measuring principle: time domain reflectometer
  • 20 pre-set cable types

Cable Fault Meter PCE-CLT 20
£ 164.00
Price excl. VAT &. delivery
2 year Warranty
The cable fault meter represents a powerful and versatile measuring instrument specifically designed for the precise measurement of electrical cables and conductors. With an impressive measurement range from 0.1 meters to an astonishing 30 kilometers, this device can measure and display cable lengths. Since the cable fault meter determines length based on conductor resistance, it can also measure resistance from 0.1 mΩ to 1999.9 Ω. 

  • Cable Length: 0.1 m … 30 km
  • Standard Cable Types: Selectable from 0.15 … 240 mm²
  • Units in meters, kilometers, and feet
  • 8 memory slots for custom cable types
  • Copper and aluminum cables
  • Resistance: 0.1 mΩ … 1999.9 Ω
Cable Fault Meter PCE-CL 20
£ 267.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-CL 20 is a cable fault meter or locator used to detect live and voltage-free electrical wires. This cable fault meter also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


  • Output signal: 125 kHz
  • Compatible with one- or two-pole circuits
  • Automatic, manual and UAC measuring modes 

Cable Fault Meter PCE-CLT 20-ICA incl. ISO calibration certificate
£ 316.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The cable fault meter represents a powerful and versatile measuring instrument specifically designed for the precise measurement of electrical cables and conductors. With an impressive measurement range from 0.1 meters to an astonishing 30 kilometers, this device can measure and display cable lengths. Since the cable fault meter determines length based on conductor resistance, it can also measure resistance from 0.1 mΩ to 1999.9 Ω. 

  • Cable Length: 0.1 m … 30 km
  • Standard Cable Types: Selectable from 0.15 … 240 mm²
  • Units in meters, kilometers, and feet
  • 8 memory slots for custom cable types
  • Copper and aluminum cables
  • Resistance: 0.1 mΩ … 1999.9 Ω
  • incl. ISO calibration certificate