• torque: 0.1 ... 2000 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

• torque: 0.01 ... 100 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

• torque: 0.01 ... 500 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

• Measuring range: 10 Nm / 7.4 ft-lb
• Resolution: 0.005 Nm / 0.0037 ft-lb
• Accuracy: 0.3% of the measuring range
• USB interface for software connection
• Integrated printer

The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

• Measuring range: 5 Nm / 3.69 ft-lb
• Resolution: 0.002 Nm / 0.0015 ft-lb
• Accuracy: 0.3% of the measuring range
• USB interface for software connection
• Integrated printer

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.

• Measuring range: 10 Nm (1 kgf-m) / 7.38 ft-lb
• Max. 0,5 % accuracy from the measuring range
• Measuring rate freely adjustable up to 1000 Hz
• 24 Bit Processor
• Keyed chuck up to Ø 13 mm

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.

• Measuring range: 5 Nm (0,5 kgf-m) / 3.69 ft-lb
• Max. 0,5 % accuracy from the measuring range
• Measuring rate freely adjustable up to 1000 Hz
• 24 Bit Processor
• Keyed chuck up to Ø 13 mm

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.

• Measuring range: 2 Nm (0,2 kgf-m) / 1.475 ft-lb
• Max. 0,5 % accuracy from the measuring range
• Measuring rate freely adjustable up to 1000 Hz
• 24 Bit Processor
• Keyed chuck up to Ø 13 mm

The Torque Meter PCE-TM 80 with external sensor to measure the static or startup torque moment in screws, components, switches, transmission shafts, etc. The Torque Meter PCE-TM 80 is an affordable solution to easily calibrate and test static torque measurements.

• Range 0 … 147 Ncm / 0 … 13.01 lbfin
• Selection of  3 units (Ncm, kgfcm, lbfin)
• Digital output RS-232
• External torque sensor
• Measures startup or static torque, not dynamic torque