Voltage Indicator

Voltage Indicator PCE-N24H
US$ 111.00
ex. VAT, ex. delivery costs
The digital voltage indicator is is used to show DC voltage parameters. The voltage indicator can measure and display direct current, direct voltage. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

  • Power supply:   230 V, 110 V, 24 V, 20 … 40 V AC/DC,   85 … 253 V AC/DC (selectable)
  • Input signal: ±100 V DC, ±250 V DC,   ± 400 V DC, 1 A DC, 5 A DC (selectable)
  • Display: 4 digits, red
  • Digit height: 20 mm / 0.78"Note: This item must be configured before ordering!
Voltage Indicator PCE-N24Z
US$ 122.00
ex. VAT, ex. delivery costs

The voltage indicator is used to display AC parameters. The voltage indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

  • Power supply:   230V, 110V, 24V, 20 … 40V AC/DC,   85 … 253 V AC/DC (selectable)
  • Input signal:   1 … 100V, 2.5 … 250V, 4 … 400V,   20 … 500 Hz, 1 A, 5 A (selectable)
  • Display: 4 digits, red
  • Digit height: 20 mm / 0.78"

Voltage Indicator PCE-N24S
US$ 123.00
ex. VAT, ex. delivery costs

The voltage indicator is used for the signal processing of 4 .. 20 mA. The voltage indicator has a 5-digit LED display to allow the user to read the directly measured current values.


  • Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
  • Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
  • Display: 4 digits, red
  • Digit height: 20 mm

Voltage Indicator PCE-N25S
US$ 125.00
ex. VAT, ex. delivery costs
The voltage indicator is used for processing standardised signals. Depending on your specific needs, the voltage indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the voltage indicator is freely scalable, which increases its application possibilities.

  • IP65 protected at the front
  • 6 different standardised signal inputs available
  • configuration via software
  • 5-digit LED display

Digital Universal Indicator PCE-N20I
US$ 135.00
ex. VAT, ex. delivery costs

The digital universal indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the digital universal indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the digital universal indicator.


  • Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
  • Accuracy: ± (0.2 % FS + 1 dgt.)
  • Two open collector outputs
  • 24 V power supply sytem for sensors and transducers

Voltage Indicator PCE-N20I
US$ 135.00
ex. VAT, ex. delivery costs

The voltage indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the voltage indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the voltage indicator.


  • Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
  • Accuracy: ± (0.2 % FS + 1 dgt.)
  • Two open collector outputs
  • 24 V power supply sytem for sensors and transducers

Voltage Indicator PCE-N20U
US$ 135.00
ex. VAT, ex. delivery costs

The PCE-N20U is a voltage indicator used for signal processing. Designed for quick and easy system integration, the digital voltage indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The voltage indicator also can output signals via two open collector outputs when a threshold value is exceeded.


  • Input (selectable): 0…10 V / 0…60 mV / ±10 V
  • Accuracy: ± (0.2 % FS + 1 digit)
  • 24 V power supply system for sensors and transducers

Voltage Indicator PCE-N20Z
US$ 171.00
ex. VAT, ex. delivery costs
The voltage indicator can be used to measure AC voltages up to 400 V and AC currents. The voltage to be measured is connected directly and can then be read on the 5-digit LED display of the voltage indicator.

  • Input:   1A AC, 5A AC, 100V AC, 250V AC,   400 V AC, 20 … 500 Hz (selectable)
  • Supply voltage:   85 … 253V AC/DC / 20 … 40 V AC/DC (selectable)
  • Display: 5 digits, three colors
  • Digit height: 14 mm / 0.55"
Voltage Indicator PCE-N30U
US$ 249.00
ex. VAT, ex. delivery costs

The voltage indicator can process several different input signals, such as 0…410/4010 Ohm, -10…+63 mV DC, -13…+13 V DC, -24…+24 mA DC or signals from thermocouples and resistance thermometers. This makes the voltage indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the voltage indicator.


  • 21-point scaling
  • IP 65 protection on the front
  • Three-colored display
  • Two alarm outputs