Indicator

Nowadays there is a big diversity of indicators which find their application in many fields and you may find the right one meeting your needs and expectations. In general, a digital indicator has been designed to display the symbol and digital information in the electronic devices and equipment. There are several ways to display the data of a digital meter, ranging from a simple neon lamp to the light emitting diodes (LEDs) and liquid crystal indicators (LCD).

The main type of indicator today is a light emitting diode (LEDs) and a liquid crystal display (LCD). Each digit of the indicator is divided into seven segments; this is the minimum number of segments needed to represent decimal numbers from zero to nine. 7-segment digital indicators are the devices consisting of 7 LEDs installed in the shape of a digit 8. With the help of lighting various segments the digits from 0 to 9 are displayed, as well as some letters of the Latin alphabet (from a to g, and if more letters should be displayed, it is possible to use additional segments).

Typically from four to eight decimal digits are displayed. The maximum number, displayed by a four-digit indicator is equal to 9999, whereas for eight-indicator, this number is 99999999.In some devices (not that expensive) 3.5-digit indicator is used, and from the left either 0 or 1 is displayed then, which means that the maximum number displayed on this indicator equals to 1999. LC indictors consume very little power (microwatts) and are sometimes used in portable instrumentation. To use LED indicators much more current is needed, and they consume a lot of power (milliwatts). Very often these indicators are widely used in digital voltmeters where power consumption is of not a primary importance.

On the other hand, the LED indicator readings can be seen in the dark, while the need for external LCD backlighting. Their ergonomics is one of the important advantages widening the possibilities of application. LED indicators provide a clear and bright display of monochrome or colourful picture at a very quick response time. They surpass the LC indicators in many characteristics: viewing angles, brightness, thickness, weight and overall dimensions, operating temperature range.LED indicators are easy to use as they can be controlled directly from the outputs of the microcontroller and there are also specials drives which allow controlling the digital indicator with a smaller number of outputs of the microcontroller.

Among the existing kinds of indicators a few can be shortly mentioned, such as: Luminescent indicators are electronic indication elements working on principle similar to the electronic lamps. Discharge indicators – ion devices for displaying the character data by using glow discharge. Compared with the neon lamps, discharge lamps have a broader functionality. These indicators can be connected directly to the voltage source or through ballast resistors.

If you have any queries, please contact us at or +1 (561) 320-9162.

Power Indicator PCE-N27P

US$ 277.00

ex. VAT, ex. delivery costs

The power indicator measures current up to 63 A directly. This makes it possible to connect the power display directly to the main distribution. The power indicator measures all relevant network parameters such as current, voltage, power and frequency. The power indicator is ideally suited for measurement purposes in order to comply with the ISO 50001 energy management standard.

Measures up to 63 A directly

Measuring about 1A / 5A transducer possible

Measurement of U, I, f, P

DIN rail

Temperature Indicator PCE-EMD 5

US$ 1,052.00

ex. VAT, ex. delivery costs

The temperature indicator can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 0.0 … 50.0 °C and the humidity measuring range is 0.0… 99.9% RH.

Temperature measuring range: 0.0 … 50.0 °C
Humidity measuring range: 0.0 … 99.9% RH
Connection of up to four external sensors
Analog 4 … 20 mA input signal
Wall mounting

Temperature Indicator PCE-EMD 5-ICA incl. ISO Calibration Certificate

US$ 1,320.00

ex. VAT, ex. delivery costs

Temperature measuring range: 0.0 … 50.0 °C
Humidity measuring range: 0.0 … 99.9% RH
Connection of up to four external sensors
Analog 4 … 20 mA input signal
Wall mounting
incl. ISO Calibration Certificate

Process Indicator PCE-N25S

US$ 94.90

ex. VAT, ex. delivery costs

The process indicator is used for processing standardised signals. Depending on your specific needs, the process indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the process indicator is freely scalable, which increases its application possibilities.

IP65 protected at the front
6 different standardised signal inputs available
configuration via software
5-digit LED display

Frequency Indicator PCE-N24Z

US$ 99.90

ex. VAT, ex. delivery costs

The frequency indicator is used to display AC parameters. The frequency indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this frequency indicator.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Voltage Indicator PCE-N24H

US$ 111.00

ex. VAT, ex. delivery costs

The digital voltage indicator is is used to show DC voltage parameters. The voltage indicator can measure and display direct current, direct voltage. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: ±100 V DC, ±250 V DC, ± 400 V DC, 1 A DC, 5 A DC (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"Note: This item must be configured before ordering!

Power Indicator PCE-N24S

US$ 115.00

ex. VAT, ex. delivery costs

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Power Display Panel for System Integration PCE-N25Z

US$ 117.00

ex. VAT, ex. delivery costs

The digital indicator PCE-N25Z can be used for processing different AC input signals. Depending on your specific needs, the digital indicator can be ordered with different inputs, like 100 V AC, 250 V AC, 400 V AC, 1 A AC, 5 A AC and 20...50 Hz. The input signal of the digital indicator is freely scalable, which increases its application possibilities.

- IP65 protected on the front
- 6 different inputs available
- Configuration via software
- 5-digit LED display

Thermocouple or PT100 Display Panel for System Integration PCE-N25T

US$ 117.00

ex. VAT, ex. delivery costs

The digital indicator PCE-N25T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.

- IP65 protected front
- For thermocouples and resistance thermometers
- Configuration via software
- 5-digit LED display

Panel Indicator PCE-N24H

US$ 119.00

ex. VAT, ex. delivery costs

The digital panel indicator is is used to show DC voltage parameters. The panel indicator can measure and display direct current, direct voltage. The possibility of freely scaling the input signal allows a very versatile use of this panel indicator.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: ±100 V DC, ±250 V DC, ± 400 V DC, 1 A DC, 5 A DC (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"Note: This item must be configured before ordering!

Panel Indicator PCE-N24Z AC Voltage / Current

US$ 122.00

ex. VAT, ex. delivery costs

The panel indicator is used to display AC parameters. The panel indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this panel indicator.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Power Indicator PCE-N24Z

US$ 122.00

ex. VAT, ex. delivery costs

The power indicator is used to display AC parameters. The power indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this power indicator.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Voltage Indicator PCE-N24Z

US$ 122.00

ex. VAT, ex. delivery costs

The voltage indicator is used to display AC parameters. The voltage indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Power Display Panel for System Integration PCE-N24Z

US$ 123.00

ex. VAT, ex. delivery costs

The digital indicator panel display PCE N24Z is used to represent AC parameters. The panel display can measure and display alternating current, AC voltage or frequency. The ability to scale the input signal is free, allowing a very wide range of applications.

- IP 65 in the front
- Measuring speed: > 0.5 sec.
- 4-digit LED screen (20 mm height)

Frequency Indicator PCE-N24S

US$ 123.00

ex. VAT, ex. delivery costs

The frequency indicator is used for the signal processing of 4 .. 20 mA. The frequency indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Panel Indicator PCE-N24S

US$ 123.00

ex. VAT, ex. delivery costs

The panel indicator is used for the signal processing of 4 .. 20 mA. The panel indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Panel Indicator PCE-N24T

US$ 123.00

ex. VAT, ex. delivery costs

The panel indicator PCE-N24T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: PT100, Thermoelement Type J / K (selectable)
Display: 4 digits, red
Digit height: 20 mm

Pressure Indicator PCE-N24S

US$ 123.00

ex. VAT, ex. delivery costs

The pressure indicator is used for the signal processing of 4 .. 20 mA. The pressure indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm