Voltage Indicator

Voltage Indicators are small installation devices to measure both alternating and direct voltages.

£ 80.00

Price excl. VAT &. delivery

The voltage indicator is used for processing standardised signals. Depending on your specific needs, the voltage indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the voltage indicator is freely scalable, which increases its application possibilities.

IP65 protected at the front
6 different standardised signal inputs available
configuration via software
5-digit LED display

Voltage Indicator PCE-N24S

£ 83.00

Price excl. VAT &. delivery

The voltage indicator is used for the signal processing of 4 .. 20 mA. The voltage indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Voltage Indicator PCE-N24Z

£ 85.00

Price excl. VAT &. delivery

The voltage indicator is used to display AC parameters. The voltage indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

Power supply: 230V, 110V, 24V, 20 … 40V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 1 … 100V, 2.5 … 250V, 4 … 400V, 20 … 500 Hz, 1 A, 5 A (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"

Voltage Indicator PCE-N24H

£ 87.00

Price excl. VAT &. delivery

The digital voltage indicator is is used to show DC voltage parameters. The voltage indicator can measure and display direct current, direct voltage. The possibility of freely scaling the input signal allows a very versatile use of this voltage indicator.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: ±100 V DC, ±250 V DC, ± 400 V DC, 1 A DC, 5 A DC (selectable)
Display: 4 digits, red
Digit height: 20 mm / 0.78"Note: This item must be configured before ordering!

Voltage Indicator PCE-N20I

£ 97.00

Price excl. VAT &. delivery

The voltage indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the voltage indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the voltage indicator.

Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
Accuracy: ± (0.2 % FS + 1 dgt.)
Two open collector outputs
24 V power supply sytem for sensors and transducers

Voltage Indicator PCE-N20U

£ 97.00

Price excl. VAT &. delivery

The PCE-N20U is a voltage indicator used for signal processing. Designed for quick and easy system integration, the digital voltage indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The voltage indicator also can output signals via two open collector outputs when a threshold value is exceeded.

Input (selectable): 0…10 V / 0…60 mV / ±10 V
Accuracy: ± (0.2 % FS + 1 digit)
24 V power supply system for sensors and transducers

Voltage Indicator PCE-N20Z

£ 116.00

Price excl. VAT &. delivery

The voltage indicator can be used to measure AC voltages up to 400 V and AC currents. The voltage to be measured is connected directly and can then be read on the 5-digit LED display of the voltage indicator.

Input: 1A AC, 5A AC, 100V AC, 250V AC, 400 V AC, 20 … 500 Hz (selectable)
Supply voltage: 85 … 253V AC/DC / 20 … 40 V AC/DC (selectable)
Display: 5 digits, three colors
Digit height: 14 mm / 0.55"

Voltage Indicator PCE-N30U

£ 168.00

Price excl. VAT &. delivery

The voltage indicator can process several different input signals, such as 0…410/4010 Ohm, -10…+63 mV DC, -13…+13 V DC, -24…+24 mA DC or signals from thermocouples and resistance thermometers. This makes the voltage indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the voltage indicator.

21-point scaling
IP 65 protection on the front
Three-colored display
Two alarm outputs