An electric vehicle EV tester is a device that is suitable for working on electric and hybrid vehicles. The abbreviation EV stands for electric vehicle. Because of the electric motors, high-voltage batteries, rectifiers and other components that are not found in conventional, non-electric vehicles with combustion engines, both workshops and inspectors must adapt to the special requirements of electric vehicles. Anyone who wants to offer service, maintenance, repairs or the general inspection which is also mandatory for an electric vehicle must have the expertise to work on high-voltage systems and the appropriate equipment for electrical vehicles in the workshop.
It is not necessary that every electric vehicle EV tester / EV test instrument is suitable for all necessary work but every tool or EV tester used for work on electric vehicles must be suitable and safe for the specific application with the electric vehicle. Before working on a high-voltage system, it must also be ensured that no voltage is present during the work. To be able to offer the complete service for electric vehicles, at least one electric vehicle EV tester / EV test instrument with suitable specifications must be available for each test.
If you have any queries, please contact us at or +44 ( 0 ) 161 464902 0.
Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special EV Test Instrument are required to check the function, the protective devices and the insulation.
CP and PP simulation
Direct connection for wallboxes
Adapter with charging plugs Type 1 and Type 2
CP simulation (communication line) A, B, C, D, error
The EV test instrument is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.
The EV test instrument is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.
The EV Test Instrument is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.
An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The EV Test Instrumentis specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument.
Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket
incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)