• torque: 0.1 ... 2000 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

• torque: 0.01 ... 100 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

• torque: 0.01 ... 500 Nm
• accuracy: ±1 % of Rd
• real-time curve
• display of the direction of rotation
• units Nm, kgf cm, lbf in
• USB interface
• adjustable limit values
• peak hold
• 7-inch touchscreen

The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

• Measuring range: 10 Nm / 7.4 ft-lb
• Resolution: 0.005 Nm / 0.0037 ft-lb
• Accuracy: 0.3% of the measuring range
• USB interface for software connection
• Integrated printer

The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

• Measuring range: 5 Nm / 3.69 ft-lb
• Resolution: 0.002 Nm / 0.0015 ft-lb
• Accuracy: 0.3% of the measuring range
• USB interface for software connection
• Integrated printer

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm / 368.78 ft-lb, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.

• Measurement range: 500 Nm (50 kgfm) / 368.78 ft-lb
• Resolution: 1 Nm / 0.738 ft-lb
• Accuracy: ±0.5 % of measurement range
• Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
• Calibration: possible with external F2 weights
• Max. overload: 50 % of measurement range

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.

• Measuring range: 10 Nm (1 kgf-m) / 7.38 ft-lb
• Max. 0,5 % accuracy from the measuring range
• Measuring rate freely adjustable up to 1000 Hz
• 24 Bit Processor
• Keyed chuck up to Ø 13 mm

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.

• Measuring range: 5 Nm (0,5 kgf-m) / 3.69 ft-lb
• Max. 0,5 % accuracy from the measuring range
• Measuring rate freely adjustable up to 1000 Hz
• 24 Bit Processor
• Keyed chuck up to Ø 13 mm

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.

• Measuring range: 2 Nm (0,2 kgf-m) / 1.475 ft-lb
• Max. 0,5 % accuracy from the measuring range
• Measuring rate freely adjustable up to 1000 Hz
• 24 Bit Processor
• Keyed chuck up to Ø 13 mm