Price excl. VAT &. delivery
2 year Warranty
N.B. Force gauge not included in delivery.
Measuring range | 0.5 ... 50 N / 0.1 ... 11 lbs |
Resolution | 0.01 N / 0.002 lbs |
Pressure calibration | 0.1 Mpa |
Load cell | Integrated load cell with M6 connection |
Measuring range | 1 ... 100% of the full scale |
Measurement accuracy | ± 0.5% |
Units | N, kg, lb |
Display | LCD |
Power supply | Internal battery, 12V / 1 A power adapter |
Operating temperature | 10 ... 30°C / 50 ... 86°F |
Relative humidity | 15 ... 80% relative humidity |
Weight | 1 kg / 2.2 lbs |
Working conditions: | |
The device must not be near sources of vibration or corrosive substances |
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
Thread reducer for SJJ accessories and force gauges / test stands
Price excl. VAT &. delivery
2 year Warranty
Force test stand PCE-FTS50 with digital display is suitable for load cells with internal measuring cell, e.g. for the PCE-FM50, PCE-FM200, PCE-DFG N 200, PCE-DFG N 500, or PCE-PTR 200.
Price excl. VAT &. delivery
2 year Warranty
The force gauge test stand is used in various combinations with our force measuring devices. Manual force measuring test stand for tensile and compressive force measurement. Suitable for many devices from PCE force measurement technology with an internally built-in force measuring cell.
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
Mounting plate for adapting the load cell of the PCE-FM1000 to the test stand LTS-20.
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
Adapter for pressure force testing of sponge, foam glass, rock material, etc.
Price excl. VAT &. delivery
2 year Warranty
Adapter ring for tensile tests. Diameter is 20 mm and capacity is 0.5 kN / 500 N / 112.4 lbs.
Price excl. VAT &. delivery
2 year Warranty
Clamping device for tensile tests of rubber, wires and cables, paper, plastic film, etc.
Price excl. VAT &. delivery
2 year Warranty
Adapter-stamp for pressure force test of spring and sponge etc.
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
Adapter clamps for tensile testing of wire and filaments.
Price excl. VAT &. delivery
2 year Warranty
Use clamping device for tensile testing of electronic parts, wires, etc.
Price excl. VAT &. delivery
2 year Warranty
Use clamping pliers for tensile tests of electronic components, wires, etc.
Price excl. VAT &. delivery
2 year Warranty
Fork holder for tensile and pressure tests.
Price excl. VAT &. delivery
2 year Warranty
Adapter clamp for tensile tests.
Price excl. VAT &. delivery
2 year Warranty
Clamping device with large opening width for pull or push test of cable, rigid material or electronic components.
Price excl. VAT &. delivery
2 year Warranty
Tensioning device for tensile tests.
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
Clamping device with large opening width for peel test of block, glass and cardboard.
Price excl. VAT &. delivery
2 year Warranty
Universal clamping device for tensile tests of rubber, sheet metal, bales, etc.
Price excl. VAT &. delivery
2 year Warranty
Clamping device for testing bristles.Max. Capacity: 500 N / 112 lbs
Price excl. VAT &. delivery
2 year Warranty
Clamping device with soft jaws for tension testing of paper, film etc.
Price excl. VAT &. delivery
2 year Warranty
Clamping device for testing bristles.Max. Capacity: 500 N / 112 lbs
Price excl. VAT &. delivery
2 year Warranty
Holder for knob and rivet test.Max. Capacity: 500 N / 112 lbs
Price excl. VAT &. delivery
2 year Warranty
Pliers for trigger tests.
Price excl. VAT &. delivery
2 year Warranty
PCE-MTS50 is a motorized material test stand for use with PCE-series force gauges. The motorized material test stand offers enhanced control and stability during force testing. It also helps to ensure the accuracy and repeatability of vertical tension and compression force test results.
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
ISO re-calibration incl. certificate for force gauge over 50 kg / 500 N / 112 lbs. This is often required to comply with DIN ISO 9000.
If your calibration certificate expires, you can easily return your meter for re-calibration. We carry out the calibration and send you the device with a new calibration certificate.
Calibration certificates are issued specifically for the customer and are excluded from the right of return
Price excl. VAT &. delivery
2 year Warranty
Universal clamping device for tensile tests of rubber, sheet metal, bales, etc.
Price excl. VAT &. delivery
2 year Warranty
The motorized tension-compression test stand is a motorized test station with a force range of up to 500 N. With the help of the horizontal test stand, it is possible to to carry out tension-compression tests.
Price excl. VAT &. delivery
2 year Warranty
This vertical force test stand is a motorized test station with a force range of up to 500 N. In addition to setting the speed, the vertical force test stand also offers the option of switching between automatic and manual mode.