Ultrasonic Thickness Gauges / Ultrasonic Wall Thickness Gauges

Non-destructive material testing by means of an ultrasonic testing device. Whether for quality inspection of the end products, for spot checks in the production process or in incoming inspection – assess the quality of your materials or workpieces using an ultrasonic tester. PCE Instruments offers testing devices for non-destructive material testing for the wall thickness measurement, hardness measurement, examination of weld seams (weld seam testing), detection of cracks and inclusions in workpieces of all kinds or for leak testing or leak detection. All ultrasonic meters operate completely non-destructively. Thus, they do not generate any additional waste during material and workpiece testing by means of ultrasound.

A portable ultrasonic measuring device already covers 90 % of all workpiece inspections for the essential measuring parameters and inspection situations in industry. In addition, there are application-specific options for ultrasonic flaw detection as well as online/inline flaw detection systems for the continuous use in production. Detect cracks, voids and inclusions, inspect welds and forgings, detect leaks and reproducibly measure the hardness of your workpieces – all with the ultrasonic flaw detector from PCE Instruments.

If you have any questions, please contact us at or +44 ( 0 ) 161 464902 0.

Ultrasonic Thickness Gauges PCE-UFD 50

£ 2,390.00

Price excl. VAT &. delivery

The ultrasonic thickness gauges is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the ultrasonic thickness gauges considerably easier.

Test range: 0 … 10000 mm
Pulse shift: -20 … +3400 µs
Single or dual probe measurement
AVG and DAC evaluation methods
Speed of sound 1000 … 15000 m/s
USB interface and software
Memory for up to 100 data records

Ultrasonic Thickness Gauges PCE-TG 75A

£ 356.00

Price excl. VAT &. delivery

The ultrasonic thickness gauges can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic thickness gauges.

Measuring range: 1.00 … 225.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 500 measured values
Calibration reference on housing

Ultrasonic Thickness Gauges PCE-TG 75A-ICA incl. ISO calibration certificate

£ 463.00

Price excl. VAT &. delivery

Measuring range: 1.00 … 225.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Ultrasonic Wall Thickness Gauges PCE-TG 150A

£ 472.00

Price excl. VAT &. delivery

The ultrasonic wall thickness gauges can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic wall thickness gauges.

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing

Ultrasonic Wall Thickness Gauges PCE-TG 150A-ICA incl. ISO calibration certificate

£ 688.00

Price excl. VAT &. delivery

Measuring range: 1.00 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of Mw. + 0.05 mm
Memory capacity: 1500 measured values

Calibration reference on housing
incl. ISO calibration certificate

Ultrasonic Wall Thickness Gauges PCE-TG 150A HT

£ 852.00

Price excl. VAT &. delivery

The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C

Ultrasonic Wall Thickness Gauges PCE-TG 150A HT-ICA incl. ISO-calibration certificate

£ 958.00

Price excl. VAT &. delivery

Measuring range (with sensor): 1.20 … 300.0 mm
Resolution: 0.01 mm at ≤99.99 mm
Accuracy: ±0.5 % of the weight. + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C
- incl. ISO-calibration certificate

Wall Thickness Meter PCE-TG 150 HT

£ 846.00

Price excl. VAT &. delivery

The wall thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the wall thickness meter.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F

Wall Thickness Gauge PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

£ 953.00

Price excl. VAT &. delivery

The ultrasonic wall thickness gauges can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic wall thickness gauges.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
incl. ISO Calibration Certificate

Ultrasonic Thickness Gauges PCE-TG 150 F2.5

£ 531.00

Price excl. VAT &. delivery

The ultrasonic thickness gauges can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic Thickness Gauges.

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F

Ultrasonic Wall Thickness Gauges PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

£ 637.00

Price excl. VAT &. delivery

Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
ICA incl. ISO Calibration Certificate

Ultrasonic Thickness Gauges PCE-FD 20

£ 4,093.00

Price excl. VAT &. delivery

PCE-FD 20 is a portable ultrasonic thickness gauges or ultrasonic wall thickness gauges with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based ultrasonic thickness gauges uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

Operating frequency range: 1 … 10 MHz
Measured time interval range: 6 … 1000 microseconds (µs)
Sound velocity: 1000 … 9999 m/s

Ultrasonic Thickness Gauge PCE-TG 300-P5EE

£ 1,141.00

Price excl. VAT &. delivery

The PCE-TG 300-P5EE is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5MHz
Bluetooth

Ultrasonic Thickness Gauge PCE-TG 300-P5EE-ICA incl. ISO calibration certificate

£ 1,243.00

Price excl. VAT &. delivery

Measuring range: P-E: 2 … 600 mm / 0.07 … 23.62", E-E: 2.5 … 100 mm / 0.09 …3.93"
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5MHz
Bluetooth
incl. ISO calibration certificate

Ultrasonic Thickness Gauge PCE-TG 300-NO5/90

£ 895.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5/90 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Sensor at 90° angle
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Ultrasonic Thickness Gauge PCE-TG 300-NO5

£ 914.00

Price excl. VAT &. delivery

The PCE-TG 300-NO5 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: 1 … 600 mm / 0.039 … 23.62" (steel)
Diameter: 10mm / 0.39"
Minimum diameter of pipes: 20 x 3 mm / 0.787 … 0.118"
Frequency: 5 MHz
Bluetooth

Ultrasonic Thickness Gauge PCE-TG 300-NO7

£ 945.00

Price excl. VAT &. delivery

The PCE-TG 300-NO7 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: 0.65 … 200 mm / 0.025 … 7.87" (steel)
Diameter: 6 mm / 0.23"
Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
Frequency: 7 MHz
Bluetooth

Ultrasonic Thickness Gauge PCE-TG 300-NO2

£ 950.00

Price excl. VAT &. delivery

The PCE-TG 300-NO2 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

Measuring range: 3.0 … 300.0 mm / 0.118 … 11.81" (steel)
Diameter: 14 mm / 0.55"
Minimum diameter of pipes: 30 mm / 1.18"
Frequency: 2.5 MHz
Bluetooth