PCE-HT-225A is a heavy-duty roll hardness tester or concrete test hammer, also called a paper roll rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with rolled paper, concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• kg/cm², psi, and MPa conversion tables 
• Optional test anvil to verify accuracy listed under accessories 

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• kg/cm², psi, and MPa conversion tables 
• Optional test anvil to verify accuracy listed under accessories 

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• kg/cm², psi, and MPa conversion tables 
• Optional test anvil to verify accuracy listed under accessories 

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• kg/cm², psi, and MPa conversion tables 
• Optional test anvil to verify accuracy listed under accessories 

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² (1450 … 8702 psi)
• Impact energy: 2.207 J or N-m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• kg/cm², psi, and MPa conversion tables 
• Optional test anvil to verify accuracy listed under accessories 

The roll hardness tester is an analog measuring device to determine concrete strength. The measuring method of the roll hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the roll hardness tester. The resulting rebound enables the roll hardness tester to determine the strength of the concrete.

• Nominal kinetic energy: 4.5 J
• For high-strength concrete
• Simple and quick operation
• For determining concrete hardness
• Schmidt principle

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• kg/cm², psi, and MPa conversion tables 
• Optional test anvil to verify accuracy listed under accessories 

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Diameter: Ø2.2mm / 0.08"
• Cable length: 1m / 3.2 ft
• Camera direction: 90°
• Resolution: 160,000 pixels
• Focusing range: 5 … 50 mm / 0.19 … 1.96"
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Diameter: Ø6mm / 0.23"
• Cable length: 5m / 16.4 ft
• Camera direction: 0°
• Resolution: 1MP
• Focusing range: 5 … 50 mm / 0.19 … 1.96"
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² or 1450 … 8702 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• kg/cm², psi, and MPa conversion tables 
• Optional test anvil to verify accuracy listed under accessories 

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Endoscope cable length: approx. 2 m / 6.5 ft
• Diameter: 3.8mm / 0.15"
• Camera resolution 160,000 pixels each
• Viewing angle front camera 120°, side camera 90°
• Focusing distance 5 … 50 mm / 0.19 … 1.96" each
• Camera head length: 42 mm / 1.6"
• Bending radius at 90° 35 mm / 1.3"
• Live images from both cameras side by side
• 7" touch screen for easy operation
• Replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

PCE-HT-225A is a heavy-duty concrete hardness tester or concrete test hammer, also called a concrete rebound hammer or Swiss hammer, used to measure surface hardness and material compression strength. Suitable for use with concrete, rock and building materials, this rugged, manufacturer-calibrated rebound hammer is both easy to use and built to last.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² (1450 … 8702 psi)
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• kg/cm², psi, and MPa conversion tables 
• Optional test anvil to verify accuracy listed under accessories 

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Diameter: Ø2.8mm / 0.11"
• Cable length: 2m / 6.5 ft
• Camera direction: 0°
• Resolution: 160,000 pixels
• Focusing range: 5 … 50 mm / 0.19 … 1.96"
• 7" touch screen for easy operation
• Replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Endoscope cable length: approx. 2 m / 6.5 ft
• Diameter: 3.8mm / 0.15"
• Front camera with resolution: 1,000,000 pixels
• Front camera viewing angle 120°
• Focus 10 … 100 mm / 0.39 … 3.9"
• Movable camera head 46 mm / 1.8" long
• Bending radius approx. 35 mm / 1.3" at 90°
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

With this NDT test instrument, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the NDT test instrument consists of braided tungsten.

• Borescope camera cable length: 2 m / 6.5 ft
• Cable diameter: 6mm / 0.23"
• Direction of view of the camera frontal
• Camera resolution 1 million pixels
• Camera viewing angle 120°
• Focusing distance 10 … 100 mm / 0.39 … 3.9"
• Flexible camera head length 60 mm / 2.3"
• Radius at 90° bend 50 mm / 1.9"
• 7" touch screen for easy operation
• replaceable battery with status display
• Storage of recording on SD card
• Motor with endoscope cable can be changed quickly
• HDMI connection for direct image transmission

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.

• Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
• Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
• Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
• Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
• Memory size: 1,000 groups for measurement data and 20 groups for calibration data
• Different probe types (also automatic motorized probes) available

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.

• Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
• Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
• Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
• Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
• Memory size: 1,000 groups for measurement data and 20 groups for calibration data
• Different probe types (also automatic motorized probes) available

PCE-5000 is a portable material hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

• Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
• Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
• Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
• Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
• Memory size: 1,000 groups for measurement data and 20 groups for calibration data
• Different probe types (also automatic motorized probes) available