- Moisture Sensor

Moisture Sensor PCE-MWM 300P
4.250,00 €
Price excl. VAT &. delivery
2 year Warranty

For industrial continuous production of wood pellets, chips, sawdust and similar materials when on-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 300P moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


  • Measuring range: 0 … 100%
  • The maximum permissible error (absolute): Lab analysis of your sample determines % error
  • Temperature range: -40 … +150 °C  (-40 … +302 °F)
  • Current consumption: 200 mA
  • Power supply : 24 (18 … 36) VDC
  • Questionnaire starts evaluation process
  • Application: pellets, wood chips

Moisture Sensor PCE-MWM 200
4.294,90 €
Price excl. VAT &. delivery
2 year Warranty

The moisture sensor is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture sensor is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).


  • Readability mass fraction of water: 0 … 100%
  • Moisture measurement range: ± 0.1 … 100% (water mass fraction))
  • Maximum permissible absolute error moisture measurement: Varies by material, lab test required
  • Temperature range: +5 … +76 °C

Moisture Sensor PCE-MWM 210
4.456,90 €
Price excl. VAT &. delivery
2 year Warranty

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


  • Measuring range: 0 … 100%
  • The maximum permissible error (absolute): Lab analysis of your sample determines % error
  • Temperature range: +5 … +80 °C  (+41 … +176 °F)
  • Questionnaire starts evaluation process

Moisture Sensor PCE-MWM 240-A
4.997,90 €
Price excl. VAT &. delivery
2 year Warranty

Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, … is continuously measurable.

  • Stainless sensor rod (250 mm length)
    • Lab analysis of your sample determines % error
    • Measuring range: 0 … 100%
    • Material temperature range: -0 … +80 °C  (+41 … +176 °F)
    • Analog and digital signal output
Moisture Sensor PCE-MWM 240-B
5.400,00 €
Price excl. VAT &. delivery
2 year Warranty

Suitable for determining the humidity of bulk substances, this moisture sensor can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

  • PCE-MWM 240-B Rod sensor (custom length 500 … 1500 mm)
  • Lab analysis of your sample determines % error
  • Measuring range: 0 … 100%
  • Material temperature range: -0 … +80 °C  (+41 … +176 °F)
  • Analog and digital signal output

Moisture Sensor PCE-MWM 220
5.856,90 €
Price excl. VAT &. delivery
2 year Warranty

Moisture sensor for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture sensor for liquid materials has a processing unit with RS232/RS485 interfaces.


  • Measurement range: 0 … 100 %
  • Limits of permissible absolute error of the measurements: Δ = 0,035 +0,05·W
  • Temperature measurement range: -40 … +150 °C

In-Process Moisture Sensor for Grain PCE-A-315
7.240,90 €
Price excl. VAT &. delivery
2 year Warranty

The PCE-A-315 inline or in-process moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


  • Boasts a measurement range of 5% to 40% for moisture content during  continuous mass flow with an error of just ±0.5% from 5% to 18% grain  moisture
  • Lowers energy costs by enabling shorter drying times and reduces labor costs  by automating the moisture monitoring process
  • Provides nearly maintenance-free operation, delivering consistently accurate  moisture readings over time
  • Analog output of 4 to 20 mA can be converted to digital for dryer control