Oxygen Meter

Oxygen Meter PCE-DOM 10
284,90 €
Price excl. VAT &. delivery
The oxygen meter PCE-DOM 10 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analysis can be carried out on the oxygen content in a very short time and with an integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

  • Measuring range up to 20 mg / L
  • For oxygen analysis
  • Temperature compensation up to 50°C / 122°F
  • For measurement in liquids and in air
  • Exchangeable oxygen sensor
Oxygen Meter PCE-DOM 20
312,90 €
Price excl. VAT &. delivery
The oxygen meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

  • Measuring range up to 20 mg / L
  • For oxygen analysis
  • Temperature compensation up to 50°C / 122°F
  • For measurement in liquids and in air
  • Exchangeable oxygen sensor
Dissolved Oxygen Meter PCE-PHD 1
451,90 €
Price excl. VAT &. delivery

The PCE-PHD 1 Dissolved Oxygen Meter is a portable and effective measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the oxygen meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.


  • Parameter: pH, Redox, Conductivity, TDS, Salt, Oxygen, Temperature
  • Automatic temperature compensation
  • Sampling rate of 1 sec.
  • SD card memory (16 GB max.)
  • Interface: RS-232
  • 3 point calibration
  • Electrodes for pH and conductivity included

Dissolved Oxygen Meter PCE-PHD 1-O2
476,90 €
Price excl. VAT &. delivery

The Dissolved Oxygen Meter PCE-PHD 1-O2 is a true all-rounder for checking the water quality. The portable oxygen meter is used to control the water parameters pH (optional), temperature (optional), conductivity (optional), salinity (optional) and oxygen.


  • Oxygen: 0 … 20 mg / l
  • Real-time data logger
  • SD card memory (16 GB max.)
  • Manual or automatic temperature compensation
  • BNC connector
  • Suitable for laboratory and on-site measurement
  • Electrode for oxygen included

Oxygen Meter PCE-WMM 100
798,90 €
Price excl. VAT &. delivery

The oxygen meter PCE-WMM 100 consists of a main unit and a remote display. The CO2 and oxygen meter PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The oxygen meter PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.

  • Measuring range CO2: 0 … 50000 ppm
  • Measuring range O2: 0 … 30 %
  • Measuring range temperature: 0 … 50 °C / 32 … 122 °F
  • Main and remote unit
  • Alarm relay
  • 4 … 20 mA analog outputs
  • Acoustic alarm

Oxygen Meter PCE-WMM 100-ICA incl. ISO Calibration Certificate
905,90 €
Price excl. VAT &. delivery
ISO Calibration

The Oxygen Meter PCE-WMM 100-ICA consists of a main unit and a remote display. The oxygen meter is used to measure carbon dioxide and oxygen in a fixed location. The oxygen meter has two relays that can be used to control alarm lights or sounders.

  • Measuring range CO2: 0 … 50000 ppm
  • Measuring range O2: 0 … 30 %
  • Measuring range temperature: 0 … 50 °C / 32 … 122 °F
  • Main and remote unit
  • Alarm relay
  • 4 … 20 mA analog outputs
  • Acoustic alarm
  • incl. ISO Calibration Certificate

Dissolved Oxygen Meter Clip SGD O2
159,90 €
Price excl. VAT &. delivery

Single-use Gas Leak Detector Crowcon Clip and Clip+ with 24- or 36-month lifetime / triple alarm-signaling / no service or calibration necessary / self-testing function / CO, H2S or O2.


  • Single-use Gas Leak Detector for O2
  • 24 months continuous operation time / detection time
  • Optic, acoustic, and haptic alarm
  • Adjustable alarm levels
  • 0 … 30 % Vol.

Oxygen Meter Xgard Type 1 O2
831,90 €
Price excl. VAT &. delivery

The Xgard-1-O2 is a single-gas Oxygen Meter used to warn for gases (Oxygen, O2, 0 … 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

  • Stationary
  • For (Oxygen, O2, 0 … 25 vol%)
  • Additional display and alarm station
  • ATEX or UL approval

Dissolved Oxygen Meter TETRA-MINI
1.183,90 €
Price excl. VAT &. delivery

TETRA-MINI alerts the user acoustically, visually and vibrationally to the presence of flammable gases (CH4), oxygen (O2), hydrogen sulfide (H2S) and carbon monoxide (CO). Furthermore, this unpumped four-gas meter displays the current measured value on its graphic LCD screen with backlight. Other gas sensors are available for this instrument. Call for details.


  • Sensor types: CH4 / H2S / CO / O2
  • Easy one-button operation
  • Rechargeable Li-ion battery
  • ATEX II 2G EEx iad IIC T4 approved

Dissolved Oxygen Meter Triple Plus + BASE
1.994,90 €
Price excl. VAT &. delivery

Triple Plus+ is the latest generation of the respected "Triple" family of toxic, oxygen and flammable gas detectors. Intrinsically safe, the Triple Plus+ provides enhanced features for safety and detector fleet managers including:


  • Selection of flammable gas correction factors (so one unit can be used in  several locations across a site)
  • Annotation of the data file with user names and site names selected from  pre-configured files in the unit

  • Call to order or see accessories tab. Must specify sensors (see chart for details) and choose with / without internal pump. Charger and software sold separately.

Oxygen Meter TXgard-Plus
1.622,13 €
Price excl. VAT &. delivery

The TXgard-Plus oxygen meter is a robust, flame-proof gas sensor for toxic gases or oxygen. The TXgard-Plus oxygen meter is available in different versions, depending on the gases for which it is to be used. The gas measuring device measures the respective gases with the help of an integrated, electrochemical detector.

  • Different versions available
  • Flame-proof construction with ATEX approval
  • Electrochemical detector
  • 3-wire 4 … 20 mA output