Salt Meter PCE-PH 30

Order no.: PCE-PH 30

GTIN (EAN): 4250348719737

Accessory

Potassium Chloride Conductivity Solution 1413μS / cm 250 ml

22,90 €

ISO certificate CAL-PCE-PH for pH meters

71,90 €

pH Electrode for PCE-PH 30

35,90 €

Redox Electrode for PCE-PH 30

49,90 €

Replacement Protective Cap for pH and ORP Electrode of PCE-PH 30

4,90 €

Conductance Solution Potassium Chloride PCE-CDS-12,88

22,90 €

Calibration Solution PCE-CDS-111,8

24,90 €

Diaphragm Cleaner with Thiourea PCE-DCS-250

28,90 €

Buffer solution PCE-PH12-500

19,90 €

Cleaning solution pepsin / hydrochloric acid PCE-GCS-500

21,90 €

Redox Solution +468 mV PCE-RTS-468

30,90 €

Redox Solution +240 mV PCE-RTS-220

30,90 €

Calibration Solution pH4 and pH7

20,90 €

Calibration Solution pH4 and pH7 and pH10

28,01 €

Calibration Solution pH10

13,90 €

Calibration Solution pH7

12,20 €

Calibration Solution pH4

12,20 €

Description

Salt meter PCE-PH 30
pH, conductivity, redox tester with interchangeable sensors / Easy-to-read LC display / Pen pH meter / Automatic temperature compensation

The pH tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable pH tester is used to control pH and conductivity. It also serves for simultaneous temperature measurement. Furthermore, the pH tester can be used to measure the redox potential.

A three-point calibration and automatic temperature compensation up to 90°C / 194°F guarantee high accuracy even with fluctuating measuring temperatures. The pH tester has a readable display. The test device is supplied with pH and temperature probe, calibration and storage fluid. The redox probe is available separately as an accessory.

Highlights

- 6 in 1 pH tester
- IP57 housing
- Automatic temperature compensation
- Battery operation
- 3 point pH calibration
- Exchangeable electrodes
- Max-Min Hold function
- Automatic electrode detection

Specification

Measuring function	pH
Measuring range	-2 ... 16 pH
Resolution	0.01 pH
Accuracy	± 0,01pH + 1Dgt
ATC	0 ... 90°C / 32 ... 194°F
Calibration	pH 4, 7, 10

Measuring function	Redox
Measuring range	± 1000 mV
Resolution	1 mV
Accuracy	± 2 mV + 1 Dgt

Measuring function	Conductivity
Measuring range	0 ... 2000 μS, 2 ... 20 mS
Resolution	1 μS, 0.01 mS
Accuracy	± 2% of measuring range
ATC	0 ... 50°C / 32 ... 122°F
Calibration	0 μS, 1413 μS, 12.88 mS

Measuring function	TDS
Measuring range	0 ... 1300 ppm, 1.3 ... 13 ppt
Resolution	1 ppm, 0.01 ppt
Accuracy	± 2% of measuring range
ATC	0 ... 50°C / 32 ... 122°F

Measuring function	Salinity
Measuring range	0 ... 1000 ppm, 1 ... 12 ppt
Resolution	1 ppm, 0.01 ppt
Accuracy	± 2% of measuring range
ATC	0 ... 50°C / 32 ... 122°F

Measuring function	Temperature
Measuring range	0 ... 90°C / 32 ... 194°F
Resolution	0.1°C / 0.18°F
Accuracy	± 0.2°C / 0.36°F + 1 Dgt

Display	LCD display
Power supply	4 x 1.5V AAA battery
Dimensions	195 x 40 x 36 mm / 7.7 x 1.6 x 1.4 in
Weight	About 135 g / < 1 lb

Delivery Scope

1 x Salt meter PCE-PH 30
1 x pH electrode
1 x Conductivity electrode
1 x pH 4 calibration liquid
1 x pH 7 calibration liquid
1 x 1413 μS / cm calibration fluid
1 x Storage solution
1 x Wrist strap
4 x 1.5V AAA battery
1 x User manual

Downloads

Manual

Datasheet