Test Stand

With the PCE-DLT 10 test stand, the water vapour resistance of samples is tested according to AMK-MB-005 Issued on 04/2015 Humidity and Climatic Resistance Test Module 1 (water vapour loading).

• Steam test according to AMK-MB-05
• Max. 5 test specimens
• Automatic test sequence with constant temperature
• Data logger
• Determination of moisture expansion
• Checking of joint formation and edge release

Ensure accurate, repeatable viscosity measurements with this flow cup viscometer test stand for use with PCE-125, PCE-127 and PCE-128 series flow cup viscometers. A must-have tool when conducting Ford, ISO or ASTM viscosity tests, this handy viscosity flow cup test stand:

• Affords hands-free viscosity measurement
• Allows for quick and easy height adjustment
• Features a built-in level for added convenience

Force test stand PCE-FTS50 with digital display is suitable for load cells with internal measuring cell, e.g. for the PCE-FM50, PCE-FM200, PCE-DFG N 200, PCE-DFG N 500, or PCE-PTR 200. 

• with digital measuring distance display
• max. range of force 500 N
• maximum operating length of 236.36 mm / 9.30"
• the mounting plate ADP-UNI must be ordered at the same time!

Our test stand for force gauge PCE-MTS500 can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The test stand for force gauge lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the test stand for force gauge offers the operator the most precise equality of test bench and sample.

• Measuring range: max. 5000 N / 500 kg
• Feed speed: 30 mm/min … 230 mm/min
• All PCE devices adaptable
• Robust steel design
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

PCE-CPT 20 is a Test Stand, or surface coating flexibility testing device, used for testing the formability, ductility, adhesion and elongation of paints, lacquers, varnishes, powder and protective coatings on sheet metal. Used in manufacturing production, paint shop and quality control applications, the Test Stand aids in determining coating strength, durability and elasticity.

• Tests surface coatings on metal sheets 0.3 to 1.25 mm thick
• Provides a maximum depression force of 2500 N
• Offers a display resolution of 0.01 mm

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

• temperature range: 5 ... 1000 °C
• resolution: 0.01 °C
• accuracy: ±5 °C
• 8-inch capacitive touch screen
• cylindrical heating chamber
• programmable temperature control
• measures according to ISO 3451 and GB / T9345.1-2008

Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel: max. 300 mm / 11.8"
• Feed speed: 30 … 230 mm/min / 1.18 … 9.05 in/min
• Manual or automatic procedure
• incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
• incl. software
• incl. force gauge PCE-DFG N 5K (0 … 5000 N)
• ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

The force measuring test stand is used in various combinations with our force measuring devices. Manual force measuring test stand for tensile and compressive force measurement. Suitable for many devices from PCE force measurement technology with an internally built-in force measuring cell.

• Force range: max. 1000 N / 100 kg / 220 lbs
• Travel: max. 345 mm / 13.5"
• Spindle pitch: 2 mm / 0.07"
• Minimal maintenance
• the mounting plate ADP-UNI must be ordered at the same time!

The Test Stand measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our Test Stands.

Dynamometer PCE-DFG N 5K

• Measuring range: 0 … 5000 N / 500 kg / 1100 lbs
• Resolution: 1N / 0.22 lbs
• Accuracy: ± 0.1% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic displayTest Stand PCE-MTS500
• Force range: max. 5000 N / 500 kg / 1100 lbs
• Travel path: max. 300 mm / 11.8"
• Feed speed: 30 mm/min … 230 mm/min / 1.18 … 9.05 in/min