Voltmeter (DMM)

• For 12V starter batteries
• Cold start current CCA:  100 … 1700 A
• Battery capacity:  30 Ah … 100 Ah
• Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

• DC voltage: 0 ... 1000 V
• AC voltage: 0 ... 750 V
• resistance: 0 ... 60 MΩ
• capacitance: 0 ... 60 mF
• frequency: 0 ... 10 MHz
• safety standard: CAT III 600 V
• non-contact voltage detection

• DC voltage: 0 ... 999.9 V
• AC voltage: 0 ... 750 V
• alternating current: 0 ... 9.999 µA
• direct current: 0 ... 9.999 A
• frequency: 0 ... 5 MHz
• resistance: 0 ... 99.99 Ω
• capacitance: 0 ... 9.999 nF
• temperature: -20 ... +1000 °C
• non-contact voltage detection
• bar graph

Mini Voltmeter for measuring AC current, AC voltage, DC current and frequency.

• AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
• DC current: 200 A / 0.1 A or 100 mA / ±2.8% + 8 digits
• AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
• Frequency: 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

• Voltmeter mode
• DC voltage: 0 ... 999.9 V
• AC voltage: 0 ... 750 V
• direct current: 0 ... 10 A
• alternating current 0 ... 10 A
• frequency: 40 Hz ... 1 kHz
• resistance: 0 ... 99.99 MΩ
• capacitance: 0 ... 99.99 mF
• temperature: -20 ... +1000 °C
• graphical display of the measured value

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

This voltmeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this voltmeter.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

• insulation resistance: 1 MΩ ... 200 GΩ
• resolution: 0.01 MΩ
• accuracy: ±(5 % of Rd. +10 digits)
• test voltages: 250 ... 2500 V
• voltage measurement: 10 ... 600 V
• resolution: 1 V
• accuracy: +(0.8 % of Rd. +5 digits)

Voltmeter to test leakage / RMS measurement / continuity and resistance test.

• Measures current up to 100 A
• Measures voltage up to 600 V
• Measures resistance up to 400 O
• Test cables are included

The voltmeter has a measuring range of 0 … 1000 A AC/DC. The current is measured inductively using the clamp on the measuring device. Live supply lines with a diameter of up to 32 mm (1.2") can be connected to the voltmeter.

• Measuring range: 0 … 1000 A AC/DC
• Bluetooth interface
• Inrush current measurement
• LC color display
• Not Connected Voltage function