Products for 'PAT Tester / Portable Appliance Testing Equipment PCE EVSE 300 '

PAT Tester / Portable Appliance Testing Equipment PCE-EVSE-KIT2

₹183,009.00

Price excl. VAT &. delivery

The Portable Appliance Testing Equipment is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the PAT Tester. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.

Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket

PAT Tester/ Portable Appliance Testing Eqpt PCE-EVSE-KIT2-ICA incl ISO Cal Cert.

₹219,168.00

Price excl. VAT &. delivery

An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The PAT Tester is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the PAT Tester.

Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket
incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)

PAT Tester / Portable Appliance Testing Equipment PCE-ITE 50

₹158,011.00

Price excl. VAT &. delivery

The PCE-ITE 50 is a robust PAT Tester with a large 3.5" TFT color LCD display. The PAT Tester also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.

3.5" color TFT LCD display
Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
SD card and Bluetooth
Dual display
Good / bad FI test
Low Ohm measurement
Up to 1000V terminal voltage

PAT Tester / Portable Appliance Testing Equipment PCE-ITE 55B

₹126,912.00

Price excl. VAT &. delivery

The PAT tester is a multifunctional measuring instrument designed for testing electrical safety in accordance with standards EN 61557 and DIN VDE 0100. It offers many functions specifically designed for the inspection and evaluation of electrical installations. The PAT tester can provide precise measurement of insulation and protective conductor resistance, RCD testing (residual current device), and other parameters necessary for VDE testing.

Testing according to: EN 61557 and DIN VDE0100
Insulation resistance R-Iso up to 999 Ω

RCD Type A, AC, B, B+ and F
Adjustable fault current 6 … 500 mA

Line and fault loop impedance
Continuity test R-Low
Voltage, phase rotation, and frequency
Testing of EV charging stations
(with optional test adapter)

PAT Tester / Portable Appliance Testing Equipment PCE-ITE 55A

₹117,091.00

Price excl. VAT &. delivery

The PAT tester is a multifunctional measuring device designed for testing electrical safety in accordance with the standards EN 61557 and DIN VDE 0100. The PAT tester offers many functions specifically designed for the inspection and assessment of electrical installations. It can provide precise measurements of insulation and protective conductor resistance, RCD (Residual Current Device) testing, and other parameters necessary for a VDE examination.

Testing according to: EN 61557 and DIN VDE0100
Insulation resistance R-Iso up to 999 Ω

RCD Type A and AC
Adjustable fault current 6 … 500 mA

Line and fault loop impedance
Continuity test R-Low
Voltage, phase sequence, and frequency
Testing of EV charging stations
(with optional test adapter)

PAT Tester / Portable Appliance Testing Equipment PCE-EVSE 310

₹49,536.00

Price excl. VAT &. delivery

The PAT tester / portable appliance testing equipment is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.

PE pre-test
Proximity Pilot PP / Control Pilot CP
Simulation CP fault "E" / PE fault
Mains socket for measuring purposes
Safety measuring sockets
Optional adapter to type 1

PAT Tester / Portable Appliance Testing Equipment PCE-EVSE 310+

₹49,536.00

Price excl. VAT &. delivery

PE pre-test
Proximity-Pilot PP / Control-Pilot CP
Simulation CP error "E" / PE error
Mains socket for measuring purposes
Safety measuring sockets
incl. type 2 plug and adapter to type 1

PAT Tester PCE-ET 5000

₹428,529.00

Price excl. VAT &. delivery

The PAT Tester is a versatile ohmmeter. With this earth tester / earth resistance meter a variety of resistance measurements can be performed. Thus, with the PAT Tester, the possibility exists to perform a normal resistance measurement of 2- or 4-pole application.

Interference currents, interference voltages, frequencies
Direct and indirect resistance measurement
Data memory for later analysis on the PC
Mobile use thanks to battery and batteries

PAT Tester PCE-IT 150

₹276,158.00

Price excl. VAT &. delivery

The PAT tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 … 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the PAT tester.

Insulation resistance: 0 … 30 TΩ
Accuracy: ± (5% of Mw.+5 digits)
Test voltage: 500 V … 15 kV
Direct alternating voltage: 30 … 600 V
Accuracy: ± (2.0% v.Mw. +3 digits)
Polarisation index PI
Dielectric absorption ratio DAR
Memory and software

PAT Tester PCE-IT414

₹164,558.00

Price excl. VAT &. delivery

The PAT Tester belong to a series of highly accurate resistance devices that have a 6 digit display. These PAT Testers have been developed specifically for technical service and for difficult measurement conditions.

For professionals
6 digit LCD
Measurements according to VDE 0413 part 1
Test tension up to 10,000V

PAT Tester PCE-IT413

₹138,964.00

Price excl. VAT &. delivery

The PAT Tester belongs to a series of highly accurate resistance devices that have a 6 digit display. These PAT Testers have been developed specifically for technical service and for difficult measurement conditions.

For professionals
6 digit LCD
Measurements according to VDE 0413 part 1
Test tension up to 5,000V

Electric Vehicle EV Tester / EV Test Instrument PCE-EVSE-KIT2

₹183,009.00

Price excl. VAT &. delivery

The EV Test Instrument is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.

Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket

PAT Tester PCE-IT 120

₹96,705.00

Price excl. VAT &. delivery

The PAT Tester detects insulation resistance up to max. 8 GΩ (with auxiliary voltages of 250, 500 and 1000V). In addition, this PAT Tester offers a measuring function for DC and AC voltages up to max. 950V DC and 700V AC as well as resistors up to max. 2 kΩ.

DC test voltage: 250/500 / 1000V
OLED display
Automatic polarity display
Automatic range selection
PI and DAR test
Degree of protection / standardization: IEC 1010-1, 700V CAT III

Electric Vehicle EVSE Tester PCE-EVSE-KIT2

₹183,009.00

Price excl. VAT &. delivery

The EVSE Measuring Device is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE Measuring Device. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.

Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket

PAT Tester PCE-ET 3000

₹78,403.00

Price excl. VAT &. delivery

This PAT Tester is used to measure lightning-arresters or ground connection lightning-arresters for all kind of buildings. earth tester possesses a hermetic case and fulfils all the VDE 0413 safety requirements for the technical service operators.

Range: 0 … 19.99/ 0 … 199/ y 0 … 1999 Ω. and 0 … 200 V AC 50/60 Hz
Resolution: 10/ 100 mΩ / 1 Ω. and 0.1 V
Accuracy: ± 2% + 2 positions and ± 3% + 2 positions.
Lower measurement limit.: 0.01 Ω.
Current of measurement: 2 mAeff / rms

EVSE Measuring Device PCE-EVSE-KIT2-ICA incl. ISO Calibration Certificate

₹219,168.00

Price excl. VAT &. delivery

An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The EVSE Measuring Device is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE Measuring Device.

Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket
incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)

Electric Vehicle EV Tester / EV Test PCE-EVSE-KIT2-ICA incl ISO Cal Certificate

₹219,168.00

Price excl. VAT &. delivery

An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The EV Test Instrumentis specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument.

Loop resistance L-N, L-PE and N-PE
Adjustable FI test current
Up to 1000 V terminal voltage
Low Ohm measurement
Direct connection for wallboxes
Adapter with charging plugs type 1 and type 2
PE conductor test
Integrated Schuko socket
incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)

PAT Tester PCE-ITM 20

₹57,273.00

Price excl. VAT &. delivery

This PAT Tester combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this PAT Tester is also equipped with a frequency and capacitance measurement.

Automatic range selection
Capacitance measurement
Integrated isolation tester
Internal memory
To IEC 1010, CAT III 1000V, CAT IV 600V
Frequency measurement