Aerosol particle counter

We offer our aerosol particle counter / aerosol particle counter in different versions online. This aerosol particle counter / aerosol particle counter is being used more and more not only in ambient measurements in clean air, but above all in factories and offices to measure the number of particles in the breathing air of employees. The aerosol particle counter / aerosol particle counter is also used in research and development or in clean room technology. The aerosol particle counter / aerosol particle counter of the PCE-PCO series, for example, draws in a certain amount of air and then counts the number of particles. (Definition of aerosol particle counters)

An aerosol particle counter / aerosol particle counter is used where fine dust values can have an effect on the climate and the human body. The Aerosol particle counters / aerosol particle counters are available with memory and software for data transfer to a computer. Each aerosol particle counter / aerosol particle counter works according to the current specifications and is delivered calibrated including a calibration certificate. Recalibration, e.g. annually (according to specifications or ISO manual), can be carried out at any time for a calibration fee.

If you have any questions, please contact us at or +91 98 33 45 81 40.

Aerosol particle counter PCE-CMM 8

With the Aerosol particle counter you can ensure the right climate in your office. The Aerosol particle counter measures the CO2 content of the air, the relative humidity and the room temperature. The Aerosol particle counter shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

Large CO2 measuring range up to 9999 ppm
Traffic light function for carbon dioxide
Measures temperature and humidity
Network operation
Suitable for classrooms, offices, lecture halls

Aerosol particle counter PCE-CPC 50

The state-of-the-art Aerosol particle counterenables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the Aerosol particle counter is performed by an internal pump.

Particle concentration: 0.3 … 10 μm
Particle measurement channel sizes:
0.3, 0.5, 1.0, 2.5, 5.0, 10 µm

Output in particles/m³,
particles/l or particles/28.3L
Modbus RTU and MQTT via RS485
Analogue output 4 . .. 20 mA

Aerosol particle counter PCE-MPC 10

PCE-MPC 10 is a portable handheld Aerosol particle counter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).

PM channels: PM 2.5, PM 10
Particle sizes (in micrometers): 2.5 µm, 10 µm
Temp. measuring range: 0 … +50 °C / +32 … +122 °F
Humidity measuring range: 0 … 100 % RH
2" full-color LCD with user-friendly graphics
Integrated data logger with adjustable sampling time
Internal memory stores up to 5000 date-and-time-stamped data sets

Aerosol particle counter PCE-MPC 25

The Aerosol particle counter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the Aerosol particle counter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

Measurable particle sizes: PM2.5 / PM10
Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
Mass concentration
Particle counter
Temperature
Humidity (RH)
Flash memory for approx. 12 measurement runs

Aerosol particle counter PCE-MPC 30

This Aerosol particle counter has many functions. With the Aerosol particle counter it is possible to determine the number of particles in the size of 0.3, 2.5 and 10 µm.

Measurable particle sizes: PM 2.5 and PM 10
Measuring range: 0 … 2000 µg / m³
Resolution: 1 µg / m³
Particle counter, HCHO, temperature measurement
Dew point and wet bulb temperature

Aerosol particle counter PCE-PCO 2

PCE-PCO 2 is a portable handheld Aerosol particle counter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature, dew point and relative humidity.

PM channels:PM 2.5, PM 10, including mass concentration mode (µg/m³)
Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
Temp. measuring range: 0 … +50 °C / +32 … +122 °F
Humidity measuring range: 0 … 100 % RH
Built-in camera for image and video recording
Free software download on PCE Software web page

Aerosol particle counter PCE-PQC 10EU (ISO 21501-4)

The Aerosol particle counter detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

Measuring range: 0.3 … 25 μm
Measuring channel sizes: 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 μm
Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
ISO 14644-1, EU GMP Annex I, FS 209E
Mass concentration
Ethernet, USB
Incl. temperature and humidity sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Aerosol particle counter PCE-PQC 20EU Incl. Calibration Certificate

The Aerosol particle counter PCE-PQC 20EU is very well suited for monitoring and checking of clean rooms, filter systems in operating rooms and filling systems in the pharmaceutical industry. The stored data records from the Aerosol particle counter can be read out and processed via the supplied software via Ethernet, USB or Wifi.

Measuring range: 0.3 … 25 μm
Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
Ethernet, USB
Incl. temperature and humidity sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Aerosol particle counter PCE-PQC 21EU Incl. Calibration Certificate

The Aerosol particle counter PCE-PQC 21EU is a portable detection system that can count particles of certain sizes in the air. Furthermore, the air temperature and the relative humidity are monitored.

Measuring range: 0.5 … 25 μm
Measurement channel sizes: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm
Counting efficiency: 50% at 0.5 μm, 100% at > 0.75 μm according to JIS
ISO 14644-1, EU GMP Annex I, FS 209E
Incl. temperature and humidity sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Aerosol particle counter PCE-PQC 22EU Incl. Calibration Certificate

The Aerosol particle counter PCE-PQC 22EU detects quickly where e.g. particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

Measuring range: 0.3 … 25 μm
Measuring channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
Ethernet, USB
CO2 sensor
Includes temperature and humidity sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Aerosol particle counter PCE-PQC 30EU Incl. Calibration Certificate

The Aerosol particle counter PCE-PQC 30EU is the most advanced particle counter on the market. Integration into a building automation and clean room management system is easily possible via Ethernet or (optionally) Wireless 802.11 b / g, RS485 or RS232.

Measuring range: 0.3 … 25 μm
Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
Interface: Ethernet, USB
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Aerosol particle counter PCE-PQC 31EU Incl. Calibration Certificate

The Aerosol particle counter PCE-PQC 31EU can be remotely controlled and monitored via a web browser. The Aerosol particle counter is a mounting device for rod or wall mounting.

Measuring range: 0.5 … 25 μm
Measurement channel sizes: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm
Counting efficiency: 50% at 0.5 μm, 100% at > 0.75 μm according to JIS
Interface: Ethernet, USB
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Aerosol particle counter PCE-PQC 32EU incl. Calibration Certificate

The PCE-PQC 32EU Aerosol particle counter measures 6 user-selectable particle size channels. This Aerosol particle counter stores up to 45,000 measured values with a time stamp.

Measuring range: 0.3 … 25 μm
Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
Interface: Ethernet, USB
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
External suction pump not included

Aerosol particle counter PCE-PQC 33EU incl. Calibration Certificate

The Aerosol particle counter PCE-PQC 33EU is the most advanced particle counter on the market. This Aerosol particle counter stores up to 45,000 measured values with time stamp.

Measuring range: 0.5 … 25 μm
Measurement channel sizes: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm
Counting efficiency: 50% at 0.5 μm, 100% at> 0.75 μm according to JIS
Interface: Ethernet, USB
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
External suction pump not included

Aerosol particle counter PCE-PQC 34EU Incl. Calibration Certificate

The environmental Aerosol particle counter PCE-PQC 34EU is characterized by its small size and easy wall mounting. The fixed installation of the environmental Aerosol particle counter ensures high-precision air quality studies.

Measuring range: 0.3 … 25 μm
Measurement channel sizes: 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 μm
Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
CO2 Sensor: 0 … 5000 ppm
Ethernet, USB
Includes temperature and humidity sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Aerosol particle counter PCE-PQC 35EU Incl. Calibration Certificate

The environmental Aerosol particle counter PCE-PQC 35EU is characterized by its small size and easy wall mounting. The fixed installation of the environmental Aerosol particle counter ensures high-precision air quality studies.

Measuring range: 0.3 … 25 μm
Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
CO2 Sensor: 0 … 5000 ppm
PID Sensor: 0 … 50 ppm
Ethernet, USB
Includes temperature and humidity sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Aerosol particle counter PCE-RCM 05

The Aerosol particle counter is used to continuously measure the particulate matter content at the workplace. The Aerosol particle counter displays PM2.5 particulate matter as well as temperature and humidity on the display.

Measuring range PM2.5: 0 … 500 μg / m³
Measuring range temperature: -10 … 50°C / 14 … 122°F
Measuring range humidity: 0 … 99% rh
Pictograms indicate air quality
Battery operation
Micro USB for charging

Aerosol particle counter PCE-RCM 10

PCE-RCM 10 is a portable handheld Aerosol particle counter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH).

PM channels: PM 2.5, PM 10
Particle sizes (in micrometers): 2.5 µm, 10 µm
Temp. measuring range: -20 … +70 °C / -4 … +158 °F
Humidity measuring range: 0 … 100 % RH
2.4" full-color LCD with user-friendly graphics
For indicative measurements