Electrical Tester

Electrical Tester PCE-360
₹249,225.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-360 is a Single-Phase Power Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate

Electrical Tester PCE-830-1-ICA incl. ISO Calibration Certificate
₹427,785.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


  • PCE-830 + PCE-6801 amp clamp (100 A)
  • Electrical conductor pick-up: 30 mm diameter
  • Range selection: manual (1 A, 10 A, 100 A)
  • Clamp dimensions: 210 x 62 x 36 mm
  • Incl. ISO calibration certificate

Electrical Tester PCE-830-2-ICA incl. ISO Calibration Certificate
₹473,169.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


  • PCE-830 + PCE-6802 amp clamp (1000 A)
  • Electrical conductor pick-up: 55 mm / 2.2 in diameter
  • Range selection: manual (10 A, 100 A, 1000 A)
  • Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
  • Incl. ISO calibration certificate

Three-Phase Electrical Tester PCE-GPA 62
₹142,387.00
Price excl. VAT &. delivery
2 year Warranty

Three-Phase Electrical Tester with network analyzer / power and energy meter with data logger.


  • Real-time test, register and measurement of voltage and current (real and effective) 
  • Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
  • Max. conductor diameter: 55 mm / 2.2 in
  • Records up to 50,000 records


Three-Phase Electrical Tester PCE-GPA 62-ICA incl. ISO Calibration Certificate
₹161,136.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

This three-phase electrical tester is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The three-phase electrical tester is equipped with data logger. The test instrument is delivered manufacturer calibrated (ISO or certification as an option).


  • Real-time test, register and measurement of voltage and current (real and effective) 
  • Measures power factor and phase angle, frequency, energy, active, reactive and apparent power   (single-phase or three-phase in symmetrical networks). 
  • Max. conductor diameter: 55 mm / 2.2 in
  • Datalogger for 50,000 readings / software/ USB interface 
  • incl. ISO Calibration Certificate

Electrical Tester PCE-360-ICA incl. ISO Calibration Certificate
₹294,163.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

  • Measuring range: 10 … 999.9 V
  • AC voltage AC
  • Alternating current AC
  • Active power
  • Power factor
  • Phase angle
  • Frequency
  • Harmonic measurement
  • Data memory: 512 kB   (non-volatile memory)
  • incl. 4 current clamps / tapping terminals
  • Standards: IP 30 / IEC 61 010, 600 V / CAT III
  • incl. ISO Calibration Certificate

Electrical Tester PCE-CBA 10
₹3,705.00
Price excl. VAT &. delivery
2 year Warranty
The Electrical Tester PCE-CBA 10 can be used as a car battery tester. To test the battery, the electrical tester can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.

  • For 12V starter batteries
  • Cold start current CCA:  100 … 1700 A
  • Battery capacity:  30 Ah … 100 Ah
  • Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Electrical Tester PCE-PI 10
₹4,449.00
Price excl. VAT &. delivery
2 year Warranty
The electrical tester PCE-PI 10 is used to determine the direction of rotation of 3-phase voltage networks. Furthermore, the electrical tester is able to measure voltages up to 600V AC / DC. The rotating field direction is important for machines and plants.

  • Measuring range: 75 … 600V AC
  • 3-phase rotating field detection
  • AC / DC voltage measurement
  • CAT III 600V
Electrical Tester PCE-LT 12
₹8,913.00
Price excl. VAT &. delivery
2 year Warranty
No-Shopping
The electrical tester is a versatile measuring instrument. In addition to the standard voltage and current measurements, the electrical tester also has a network analysis. With this network analysis, the electrical tester can be used to check, for example, LAN connections for their correct wiring and function.

Measurement function:
  • AC voltage
  • DC voltage
  • AC
  • DC
  • Resistance
  • Diode measurement
  • Continuity test
Electrical Tester PCE-LT 15
₹10,401.00
Price excl. VAT &. delivery
2 year Warranty
The electrical tester PCE-LT 15 is a combination device which detects configuration errors in the network and can be used as a electrical tester at the same time. Thus, the periphery of a network can be quickly checked with the LAN tester. 

Measuring function:
  • AC voltage: 750V
  • DC voltage: 1000V
  • Resistance: 4 MΩ
  • Continuity test: 400 Ω
  • Electrical safety: CAT III 600V
Electrical Tester PCE-DC1
₹11,443.00
Price excl. VAT &. delivery
2 year Warranty
No-Shopping

The Electrical Tester has been designed to detect, indirectly, AC/DC current and frequency. The Electrical Tester has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.


  • AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
  • DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
  • AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
  • Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

Electrical Tester PCE-CBA 20
₹12,038.00
Price excl. VAT &. delivery
2 year Warranty
No-Shopping

The Electrical Tester tests 12V and 24V starter batteries. The vehicle battery tester checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling. 

  • Measurement object:  12V / 24V starter batteries

  • Battery standards: DIN, JIS, EN, SAE

  • Power supply: 9 … 35V DC via test voltage

Electrical Tester PCE-DC2
₹17,395.00
Price excl. VAT &. delivery
2 year Warranty

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.


  • AC / DC current, voltage and resistance measurement
  • 3 2/3-digit LCD display
  • Power supply: 2 x 1.5V AAA battery
  • Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

Electrical Tester PCE-DC3
₹18,883.00
Price excl. VAT &. delivery
2 year Warranty

This electrical tester was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this electrical tester.

  • AC/DC current, AC voltage and frequency measurement
  • AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
  • DCA zero point function

Electrical Tester PCE-MO 1500
₹22,603.00
Price excl. VAT &. delivery
2 year Warranty
The Electrical Tester was developed to simplify on-site troubleshooting in both industrial systems and solar systems. With selectable test voltages from 250 ... 2500 V and resistance measurement up to 200 GΩ, this Electrical Tester allows several operations to be carried out with just one tool.

  • insulation resistance: 1 MΩ ... 200 GΩ
  • resolution: 0.01 MΩ
  • accuracy: ±(5 % of Rd. +10 digits)
  • test voltages: 250 ... 2500 V
  • voltage measurement: 10 ... 600 V
  • resolution: 1 V
  • accuracy: +(0.8 % of Rd. +5 digits)
Electrical Tester PCE-BDM 20
₹24,835.00
Price excl. VAT &. delivery
2 year Warranty
This is a electrical tester for a stationary workplace. In addition to measuring the current, voltage and resistance, the PCE-BDM 20 electrical tester can also measure the temperature using two thermocouples and also determine the conductivity.

Parameter:
  • AC voltage, DC voltage
  • AC / DC
  • Resistance, conductivity
  • Capacitance measurement, temperature
  • Frequency measurement , duty cycle ratio
  • Pulse width, continuity test
  • Diode test
Electrical Tester PCE-CLT 10
₹26,025.00
Price excl. VAT &. delivery
2 year Warranty
The electrical tester PCE-CLT 10 is a multifunctional device which enables high accuracy and fast measurement results. If used appropriately, the electrical tester can be used to measure cables that are installed and are still to be installed. 

  • Measuring range cable length: 5 … 3000 m / 16.4 … 9842.5 ft
  • Measurement Units: m, ft
  • Resolution: 0.1 m / 0.3 ft
  • Measuring principle: time domain reflectometer
  • 20 pre-set cable types
Electrical Tester PCE-IT 200
₹27,067.00
Price excl. VAT &. delivery
2 year Warranty
Our compact electrical tester is perfect for measuring the insulation resistance of electrical devices and household appliances. With its ability to measure insulation resistance, AC voltage, low resistance, PI (polarization index) and DAR (dielectric absorption), the electrical tester is a versatile and reliable measuring tool for many application scenarios.

  • Insulation resistance up to 5.5 GΩ
  • Accuracy ±5% of Mw. ±3 digits (over100 kΩ)
  • Direct and alternating voltages 30 …600 V
  • Resistance 0 … 999 Ω
  • PI (polarization index)
  • DAR (dielectric absorption)
  • Power supply via battery or mains adapter