Multimeter / TRMS Multimeter PCE-DC 41

Order no.: PCE-DC 41

GTIN (EAN):

Accessory

Calibration certificate CAL-PCE-DC for clamp meters

₹20,073.00

Description

Multimeter / TRMS Multimeter PCE-DC 41

Voltage metering up to 600 V / current metering up to 600 A / CAT III 600 V
Electrical resistance metering up to 1000 Ω / contact-free measuring of electrical conductors

The Multimeter / TRMS Multimeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the Multimeter / TRMS Multimeter, or you can use the integrated clamp mechanism. By using the clamp of the Multimeter / TRMS Multimeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it. You can also check the continuity with the Multimeter / TRMS Multimeter.

Due to its compact design and light weight, the device is well-suited for mobile use. When using the clamp mechanism, it is also possible to run the Multimeter / TRMS Multimeter with one hand only. The measured data is shown on the large backlit 4-digit display. By using the peak-hold or data-hold function, you can also freeze the readings on the display. The auto power-off function saves battery power, when the device is not in use.

Highlights

- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism
- Continuity check

- Peak- and data-hold function
- Measuring leads included in the package
- 4-digit display
- Display backlight
- Auto power-off

Specification

Technical Specifications
Direct voltage
Range	Resolution	Accuracy
Input impedance: 1 MΩ	600 V	0.1 V	± 1 % + 2 digits
Direct voltage (peak model)
Range	Resolution	Accuracy
Input impedance: 1 MΩ	600 V	0.1 V	± 1.5 % + 8 digits
Alternating voltage
Range	Resolution	Accuracy
Input impedance: 1 MΩ	600 V	0.1 V	± 1.2 % ± 5 digits (50 ... 500 Hz)
Alternating voltage (peak model)
Range	Resolution	Accuracy
Input impedance: 1 MΩ	600 V	0.1 V	± 1.7 % + 10 digits
Direct current
Range	Resolution	Accuracy
60 A	0.01 A	± 2 % + 5 digits
600 A	0.1 A
Direct current (peak model)
Range	Resolution	Accuracy
600 A	0.1 A	± 2.5 % + 8 digits
Alternating current
Range	Resolution	Accuracy
60 A	0.01 A	±2 % + 5 digits (50...60 Hz) ±3 % + 5 digits (60...500 Hz)
600 A	0.1 A
Alternating current (peak model)
Range	Resolution	Accuracy
600 A	0.01 A	±2.5 % + 10 digits
Electrical resistance
Range	Resolution	Accuracy
1000 Ω	0.1 Ω	± 1 % + 2 digits
Continuity check
Range		Buzzer function
<40 Ω
General specifications
Display		4-digit LCD maximum reading: 6200
Sampling rate		3 times/s
Power supply		2 x 1.5 V AAA batteries
Battery life		approx. 50 hours (without buzzer and backlight function)
Auto Power Off		after 30 minutes of inactivity
Operating conditions		0 ... +40 °C; < 70 % RH
Storage conditions		-10 ... +60 °C; < 80 % RH
Maximum clamp opening		Ø 25 mm
Dimensions		210 x 62 x 36 mm
Weight		273 g with batteries