NDT Test Instruments

The NDT tester PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the NDT tester can be adjusted, depending on the operation purpose. Besides taking infrared images, the NDT tester can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.

• Measurement range: -20 … +600°C / -4 … 1112°F
• Accuracy: ± 2%, ± 2°C / 3.6°F
• Frequency image recording: 9 Hz
• Camera: 32 x 31 Pixel

The NDT tester PCE-TC 28 was designed for taking non-contact temperature measurements. To get accurate readings, the emissivity of the NDT tester can be adjusted, depending on the operation purpose. Besides taking infrared images, the NDT tester can also take normal pictures, as well as a mixture of both, due to the built-in digital camera.

• Measurement range: -20 … +600°C / -4 … 1112°F
• Accuracy: ± 2%, ± 2°C / 3.6°F
• Frequency image recording: 9 Hz
• Camera: 32 x 31 Pixel- incl. ISO Calibration Certificate

PCE-DD-D is a Shore D durometer or hardness tester. This Shore D durometer uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.

• For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,  thermoplastic and more
• Measurement range: 0 … 100 Shore D
• Accuracy: ± 2 Hardness - Grade

PCE-2500N is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

• Measuring principle: Leeb Rebound method
• Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
• Accuracy: ± 0.5%; Repeatability: ± 0.8%
• Type D impact device

PCE-2500N-ICA is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.

• Measuring principle: Leeb Rebound method
• Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB), Vickers (HV), Shore (HS) or Leeb (HLD)
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
• Accuracy: ± 0.5%; Repeatability: ± 0.8%
• Type D impact device
• Includes ISO calibration certificate

PCE-CT 65 is a paint thickness gauge that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.

• Measuring range of 0 … 1350 µm / 0 … 53 mils
• Accuracy of ±2.5 % ±2 µm for 0 … 1000 µm / ±3.5 % for 1000 µm … 1350 µm / ±2 % ±0.08 mils for 0 … 39.3 mils / ±3.5 % for 39.3 mils … 53.1 mils
• Saves up to 1500 measurements to memory

PCE-CT 65 is a paint thickness gauge that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This thickness gauge is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.

• Measuring range of 0 … 1350 µm / 0 … 53 mils
• Accuracy of ±2.5 % ±2 µm for 0 … 1000 µm / ±3.5 % for 1000 µm … 1350 µm / ±2 % ±0.08 mils for 0 … 39.3 mils / ±3.5 % for 39.3 mils … 53.1 mils
• Saves up to 1500 measurements to memory
• Incl. ISO Calibration Certificate

PCE-CT 5000H is a car measuring device used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The car measuring device automatically detects the type of metal to be measured.

• Type F measuring range: 0 … 5000 µm / 0 … 5 mm / 0 … 196 mils
• Type N measuring range: 0 … 3000 µm / 0 … 3 mm / 0 … 118 mils
• Displays measuring units in μm, mm or mils
• Saves up to 2000 measurements to internal memory
• Practical V-groove on the measuring head

PCE-CT 5000H is a car measuring device used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The car measuring device automatically detects the type of metal to be measured.

• Type F measuring range: 0 … 5000 µm / 0 … 5 mm / 0 … 196 mils
• Type N measuring range: 0 … 3000 µm / 0 … 3 mm / 0 … 118 mils
• Displays measuring units in μm, mm or mils
• Saves up to 2000 measurements to internal memory
• Practical V-groove on the measuring head
• Incl. ISO Calibration Certificate

The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous metals without damaging the coating's surface. The Thickness Gauge stands out due to its high range of measurement.

• Measurement range: 0 … 1250 µm / 49.2 mils
• Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm … 99.9 µm / 3.9  mils) 1 µm / 0.04 mils (above the range)
• Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
• Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits

The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Thickness Gauge stands out due to its high range of measurement.

• Measurement range: 0 … 1250 µm / 49.2 mils
• Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm … 99.9 µm / 3.9 mils)  1 µm / 0.04 mils (above the range)
• Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
• Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
• Incl. ISO Calibration Certificate

The industrial borescope gives you new, visual insights into the interior of motors and systems. The industrial borescope is the ideal tool for maintenance and repair in workshops or industrial companies. Optical analysis with an industrial borescope has never been so easy.

• Cable length:  2000 mm, 6.56 ft
• Cable diameter:  2.8 mm, 0.11"
• 0° viewing angle
• Camera resolution / image sensor: 400 x 400 Px
• Cable type: flexible
• Video output: HDMI
• LED light

The industrial borescope with side view camera gives you new, visual insights into the interior of motors and systems. The industrial borescope with side view camera is the ideal tool for maintenance and repair in workshops or industrial companies. Optical analysis with an industrial borescope has never been so easy.

• Cable length:  2000 mm, 6.56 ft
• Cable diameter:  3 mm, 0.11"
• Camera resolution / image sensor: 400 x 400 Px
• Cable type: flexible
• Video output: HDMI
• Side view camera
• LED light

The industrial borescope gives you new, visual insights into the interior of motors and systems. The industrial borescope is the ideal tool for maintenance and repair in workshops or industrial companies. Optical analysis with an industrial borescope has never been so easy.

• Cable length:  1000 mm, 3.28 ft
• Cable diameter:  2.1 mm, 0.08"
• 0° viewing angle
• Camera resolution / image sensor: 400 x 400 Px
• Cable type: flexible
• Video output: HDMI
• LED light