Price excl. VAT &. delivery
2 year Warranty
- Usable up to 80°C / 176°F
- Improves contact between the transducer head and the material to be measured
- Protects material surfaces from the transducer head
- 100 ml size
- See downloads for MSDS
Ultrasonic Flow Meter Kit PCE-TDS 100HSH
Measures liquid flow velocity in pipes and tubes with a diameter of 20 … 720 mm (approx. 3/4" ... 28")
v = measured velocity
T1 = run time of the ultrasonic signal in the flow direction
T2 = run time of the ultrasonic signal against the flow direction
L = length of the ultrasonic wave
α = ultrasonic signal angle to the flow
The transit-time principle requires pipes to be full and have no bubbles and no particles.
Note: To transfer data to a computer, SOFT-PCE-TDS software is required. SOFT-PCE-TDS software sold separately - see accessories for details.
Each PCE-TDS series meter is assembled by PCE Instruments in Germany and and factory-calibrated (without any documentation). The reference display of the in-house test stand used by PCE for calibration has a valid DAkkS calibration certificate. This ensures traceability to the Physikalisch-Technische Bundesanstalt (PTB) German national standard. Please note that the meter's measured values depend on the pipe geometry, material and coating; the medium type, temperature and speed; and the sensor type and measuring method.
Measuring range | -32 ... 32 m/s, -105 ... 105 ft/s |
Resolution | 0.0001 m/s, 0.00033 ft/s |
Accuracy for DN ≥ 50 mm: | ± 1.5% of measured value |
for DN < 50 mm: | ± 3.5% of measured value |
Reproducibility | ± 1.0% of measured value |
Units | Meters, feet, cubic meters, liters, cubic feet, gallon, oil barrel, liquid barrel, million gallon |
Response time | 0 ... 999 seconds, freely configurable |
Pipe diameter | DN 15 ... 700, 20 … 720 mm / approx. 3/4" ... 28" |
Measuring media | All liquids with an impurity <5% and a flow >0.03 m³/h |
Heads | Type M1 and S1 |
Cable length | Approx. 5 m / 16.4 ft each (x 4) |
Display | 4 x 16 LCD, 7 digits for net flow, positive and negative flow |
Power supply | 3 x AAA Ni-H rechargeable batteries |
Battery life | Approx. 10 hours continuous use at full charge |
Battery charger | 100 .. 240V / AC |
Interface | RS-232C |
Memory | Stores up to 60,000 values |
Housing material | ABS plastic |
Dimensions | Device: 100 x 66 x 20 mm / 3.93 x 2.60 x 0.79 in Transducers: 2 x M1 each 60 x 45 x 45 mm / 2.36 x 1.77 x 1.77 in 2 x S1 each 90 x 85 x 24 mm / 3.54 x 3.35 x 0.95 in |
Operating temp. | 0 ... 70ºC / 32 ... 158ºF |
Weight | 514 g / 1.14 lb (with batteries) |
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
ISO calibration certificate for the flow meter, certifies traceability to test standards and is required to comply with ISO 9000 requirements.
2 different pipe diameters, each 1x speed
The calibration certificate is issued especially for the customer and therefore is exempt from the right of return.
Price excl. VAT &. delivery
2 year Warranty
The contact gel is used in ultrasonic material thickness measurements. The gel ensures good contact between the measuring head and the workpiece. The high temperature contact gel can be used at temperatures up to 350°C / 662°F.
Price excl. VAT &. delivery
2 year Warranty
On-rail flow sensor for 20 … 108 mm pipe diameter / temperatures up to 160°C / suitable for PCE-TDS 100H and PCE-TDS 100HS.
Price excl. VAT &. delivery
2 year Warranty
On-rail flow sensor for 50 … 720 mm pipe diameter / temperatures up to 160°C / suitable for PCE-TDS 100H and PCE-TDS 100HS.
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty