Ultrasonic testing device

Ultrasonic testing device PCE-FD 20
₹684,316.00
Price excl. VAT &. delivery

PCE-FD 20 is a Ultrasonic testing device or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


  • Operating frequency range: 1 … 10 MHz
  • Measured time interval range: 6 … 1000 microseconds (µs)
  • Sound velocity: 1000 … 9999 m/s 

 

Ultrasonic testing device PCE-UFD 50
₹399,662.00
Price excl. VAT &. delivery
The Ultrasonic testing device is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the Ultrasonic testing device considerably easier.

  • Test range: 0 … 10000 mm
  • Pulse shift: -20 … +3400 µs
  • Single or dual probe measurement
  • AVG and DAC evaluation methods
  • Speed of sound 1000 … 15000 m/s
  • USB interface and software
  • Memory for up to 100 data records
Ultrasonic testing device PCE-UFD 50
₹399,662.00
Price excl. VAT &. delivery
The Ultrasonic testing device is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm.

  • Test range: 0 … 10000 mm
  • Pulse shift: -20 … +3400 µs
  • Single or dual probe measurement
  • AVG and DAC evaluation methods
  • Speed of sound 1000 … 15000 m/s
  • USB interface and software
  • Memory for up to 100 data records
Ultrasonic testing device PCE-UCD 100
₹781,185.00
Price excl. VAT &. delivery
The Ultrasonic testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this Ultrasonic testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative Ultrasonic testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

  • Measurement range: -1677700 µs to +1677700 µs
  • Resolution: 0.05 µs
  • Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
  • Includes a camera for measuring crack width
  • Bandwidth: 1 to 500 kHz
  • Display: 10.1" TFT touchscreen display
  • Internal storage: 8 GB
Ultrasonic testing device PCE-TG 150 F2.5
₹54,227.00
Price excl. VAT &. delivery
The Ultrasonic testing device can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic testing device.

  • Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • Probe temperature range: -10 … 60 °C / 14 … 140 °F
Ultrasonic testing device PCE-TG 75A
₹59,505.00
Price excl. VAT &. delivery
The ultrasonic thickness gauges can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic thickness gauges.

  • Measuring range: 1.00 … 225.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of Mw. + 0.05 mm
  • Memory capacity: 500 measured values
  • Calibration reference on housing
Ultrasonic testing device PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificat
₹65,147.00
Price excl. VAT &. delivery
ISO Calibration
The Ultrasonic testing device can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic testing device.

  • Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • Probe temperature range: -10 … 60 °C / 14 … 140 °F
  • incl. ISO Calibration Certificate
Ultrasonic testing device PCE-TG 75A-ICA incl. ISO calibration certificate
₹77,361.00
Price excl. VAT &. delivery
ISO Calibration
The ultrasonic thickness gauges can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic thickness gauges.

  • Measuring range: 1.00 … 225.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of Mw. + 0.05 mm
  • Memory capacity: 500 measured values
  • Calibration reference on housing
  •  incl. ISO calibration certificate
Ultrasonic testing device PCE-TG 150A
₹78,849.00
Price excl. VAT &. delivery
The Ultrasonic testing device can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the Ultrasonic testing device.

  • Measuring range: 1.00 … 300.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of Mw. + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
Ultrasonic testing device PCE-ULM 10
₹82,718.00
Price excl. VAT &. delivery
The Ultrasonic testing device is the ideal measuring device to determine the fill level of a silo. Thanks to the 4 … 20-mA output signal, the Ultrasonic testing device can also be connected to the operational process control.

  • Measuring range: 0 … 10 m / 0 … 32.8 ft
  • Accuracy: 0.5%
  • Resolution: 0.001 m
  • With display for setting and reading
  • Stable M60 connection thread
Ultrasonic testing device PCE-TG 150 HT
₹86,441.00
Price excl. VAT &. delivery
The Ultrasonic testing device can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic testing device.

  • Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • High temperature probe: -10 … 350 °C / 14 …  662 °F
Ultrasonic testing device PCE-TG 150 HT-ICA incl. ISO Calibration Certificate
₹97,361.00
Price excl. VAT &. delivery
ISO Calibration
The Ultrasonic testing device can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic testing device.

  • Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • High temperature probe: -10 … 350 °C / 14 …  662 °F
  •  incl. ISO Calibration Certificate
Ultrasonic testing device PCE-ULM-10-N24S
₹105,038.00
Price excl. VAT &. delivery

The Ultrasonic testing device is the ideal measuring device to determine the filling level of a silo. Thanks to the 4 … 20 mA output signal, the Ultrasonic testing device can also be connected to the operational process control.

  • Measuring range: 0 … 10 m / 0 … 32.8 ft
  • Accuracy: 0.5%
  • Resolution: 0.001 m
  • With display for setting and reading
  • Stable M60 connection thread
  • incl. external digital display PCE-N24S:
  • Voltage supply: selectable
  • Input signal: selectable
  • Display: 4 digits, red
  • Digit height: 20 mm / 0.78"

 

Ultrasonic testing device PCE-TG 150A-ICA incl. ISO calibration certificate
₹115,008.00
Price excl. VAT &. delivery
ISO Calibration
The Ultrasonic testing device can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the Ultrasonic testing device.

  • Measuring range: 1.00 … 300.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of Mw. + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • incl. ISO calibration certificate
Ultrasonic testing device PCE-UFM 10
₹138,369.00
Price excl. VAT &. delivery
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN10 / 3/8" and various pipe materials such as steel, copper, aluminum, and plastics.

  • Measurement Range: 0.1 … 5 m/s
  • Resolution: 0.001 m/s
  • Accuracy: 2%
  • Pipe Size: DN10 / 3/8"
  • Display Type: OLED
  • Analog Output: 4 … 20mA
Ultrasonic testing device PCE-UFM 15
₹138,369.00
Price excl. VAT &. delivery
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN15 / 1/2" and various pipe materials such as steel, copper, aluminum, and plastics.

  • Measurement Range: 0.1 … 5 m/s
  • Resolution: 0.001 m/s
  • Accuracy: 2%
  • Pipe Size:DN15 / 1/2"
  • Display Type: OLED
  • Analog Output: 4 … 20mA
Ultrasonic testing device PCE-UFM 20
₹138,369.00
Price excl. VAT &. delivery
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN20 / 3/4" and various pipe materials such as steel, copper, aluminum, and plastics.

  • Measurement Range: 0.1 … 5 m/s
  • Resolution: 0.001 m/s
  • Accuracy: 2%
  • Pipe Size:DN20 / 3/4"
  • Display Type: OLED
  • Analog Output: 4 … 20mA
Ultrasonic testing device PCE-UFM 25
₹138,369.00
Price excl. VAT &. delivery
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN25 / 1" and various pipe materials such as steel, copper, aluminum, and plastics.

  • Measurement Range: 0.1 … 5 m/s
  • Resolution: 0.001 m/s
  • Accuracy: 2%
  • Pipe Size:DN25 / 1"
  • Display Type: OLED
  • Analog Output: 4 … 20mA