Indicator

Nowadays there is a big diversity of indicators which find their application in many fields and you may find the right one meeting your needs and expectations. In general, a digital indicator has been designed to display the symbol and digital information in the electronic devices and equipment. There are several ways to display the data of a digital meter, ranging from a simple neon lamp to the light emitting diodes (LEDs) and liquid crystal indicators (LCD).

The main type of indicator today is a light emitting diode (LEDs) and a liquid crystal display (LCD). Each digit of the indicator is divided into seven segments; this is the minimum number of segments needed to represent decimal numbers from zero to nine. 7-segment digital indicators are the devices consisting of 7 LEDs installed in the shape of a digit 8. With the help of lighting various segments the digits from 0 to 9 are displayed, as well as some letters of the Latin alphabet (from a to g, and if more letters should be displayed, it is possible to use additional segments).

Typically from four to eight decimal digits are displayed. The maximum number, displayed by a four-digit indicator is equal to 9999, whereas for eight-indicator, this number is 99999999.In some devices (not that expensive) 3.5-digit indicator is used, and from the left either 0 or 1 is displayed then, which means that the maximum number displayed on this indicator equals to 1999. LC indictors consume very little power (microwatts) and are sometimes used in portable instrumentation. To use LED indicators much more current is needed, and they consume a lot of power (milliwatts). Very often these indicators are widely used in digital voltmeters where power consumption is of not a primary importance.

On the other hand, the LED indicator readings can be seen in the dark, while the need for external LCD backlighting. Their ergonomics is one of the important advantages widening the possibilities of application. LED indicators provide a clear and bright display of monochrome or colourful picture at a very quick response time. They surpass the LC indicators in many characteristics: viewing angles, brightness, thickness, weight and overall dimensions, operating temperature range.LED indicators are easy to use as they can be controlled directly from the outputs of the microcontroller and there are also specials drives which allow controlling the digital indicator with a smaller number of outputs of the microcontroller.

Among the existing kinds of indicators a few can be shortly mentioned, such as: Luminescent indicators are electronic indication elements working on principle similar to the electronic lamps. Discharge indicators – ion devices for displaying the character data by using glow discharge. Compared with the neon lamps, discharge lamps have a broader functionality. These indicators can be connected directly to the voltage source or through ballast resistors.

If you have any queries, please contact us at or +44 ( 0 ) 161 464902 0.

Power Indicator PCE-N27P

£ 178.00

Price excl. VAT &. delivery

The power indicator measures current up to 63 A directly. This makes it possible to connect the power display directly to the main distribution. The power indicator measures all relevant network parameters such as current, voltage, power and frequency. The power indicator is ideally suited for measurement purposes in order to comply with the ISO 50001 energy management standard.

Measures up to 63 A directly

Measuring about 1A / 5A transducer possible

Measurement of U, I, f, P

DIN rail

Temperature Indicator PCE-EMD 5

£ 709.00

Price excl. VAT &. delivery

The temperature indicator can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 0.0 … 50.0 °C and the humidity measuring range is 0.0… 99.9% RH.

Temperature measuring range: 0.0 … 50.0 °C
Humidity measuring range: 0.0 … 99.9% RH
Connection of up to four external sensors
Analog 4 … 20 mA input signal
Wall mounting

Temperature Indicator PCE-EMD 5-ICA incl. ISO Calibration Certificate

£ 890.00

Price excl. VAT &. delivery

Temperature measuring range: 0.0 … 50.0 °C
Humidity measuring range: 0.0 … 99.9% RH
Connection of up to four external sensors
Analog 4 … 20 mA input signal
Wall mounting
incl. ISO Calibration Certificate

Analogue Indicator PCE-EP29

£ 33.00

Price excl. VAT &. delivery

The analogue indicator or display PCE-EP 29 is designed to measure simple three-phase-voltages. The analogue display PCE-EP 29 is designed for alternating currents and can measure up to 500 V directly without the need of a transformer (phase-to-phase). The analogue display is designed in CAT III and can be applied to many monitoring tasks of voltages in system control.

Analogue voltmeter with change over
96 x 96 mm
Panel installation

Frequency Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery

The frequency indicator is used for processing standardised signals. Depending on your specific needs, the frequency indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the frequency indicator is freely scalable, which increases its application possibilities.

IP65 protected at the front
6 different standardised signal inputs available
configuration via software
5-digit LED display

Panel Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery

The panel indicator is used for processing standardised signals. Depending on your specific needs, the panel indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the panel indicator is freely scalable, which increases its application possibilities.

IP65 protected at the front
6 different standardised signal inputs available
configuration via software
5-digit LED display

Power Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery

The power indicator is used for processing standardised signals. Depending on your specific needs, the power indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the power indicator is freely scalable, which increases its application possibilities.

IP65 protected at the front
6 different standardised signal inputs available
configuration via software
5-digit LED display

Pressure Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery

The pressure indicator is used for processing standardised signals. Depending on your specific needs, the pressure indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the pressure indicator is freely scalable, which increases its application possibilities.

IP65 protected at the front
6 different standardised signal inputs available
configuration via software
5-digit LED display

Process Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery

The process indicator is used for processing standardised signals. Depending on your specific needs, the process indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the process indicator is freely scalable, which increases its application possibilities.

IP65 protected at the front
6 different standardised signal inputs available
configuration via software
5-digit LED display

Temperature Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery

The temperature indicator is used for processing standardised signals. Depending on your specific needs, the temperature indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the temperature indicator is freely scalable, which increases its application possibilities.

IP65 protected at the front
6 different standardised signal inputs available
configuration via software
5-digit LED display

Temperature Indicator PCE-N25T

£ 80.00

Price excl. VAT &. delivery

The digital temperature indicator is used for processing signals coming from temperature sensors. Depending on your specific needs, the temperature indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the temperature indicator is freely scalable, which increases its application possibilities.

IP65 protected front
For thermocouples and resistance thermometers
Configuration via software
5-digit LED display

Voltage Indicator PCE-N25S

£ 80.00

Price excl. VAT &. delivery

The voltage indicator is used for processing standardised signals. Depending on your specific needs, the voltage indicator can be ordered with different inputs, such as 0…20 mA, 4…20 mA, 0…60 mV, 0…10 V, ±60 mV or ±10 V. The input signal of the voltage indicator is freely scalable, which increases its application possibilities.

IP65 protected at the front
6 different standardised signal inputs available
configuration via software
5-digit LED display

Frequency Indicator PCE-N24S

£ 83.00

Price excl. VAT &. delivery

The frequency indicator is used for the signal processing of 4 .. 20 mA. The frequency indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Panel Indicator PCE-N24S

£ 83.00

Price excl. VAT &. delivery

The panel indicator is used for the signal processing of 4 .. 20 mA. The panel indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Power Indicator PCE-N24S

£ 83.00

Price excl. VAT &. delivery

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Pressure Indicator PCE-N24S

£ 83.00

Price excl. VAT &. delivery

The pressure indicator is used for the signal processing of 4 .. 20 mA. The pressure indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Process Indicator PCE-N24S

£ 83.00

Price excl. VAT &. delivery

The process indicator is used for the signal processing of 4 .. 20 mA. The process indicator has a 5-digit LED display to allow the user to read the directly measured current values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm

Temperature Indicator PCE-N24S

£ 83.00

Price excl. VAT &. delivery

The temperature indicator is used for the signal processing of 4…20 mA. The temperature indicator offers a wide field of application due to the fact that its signal can be freely scaled. The temperature indicator has a 5-digit LED display to allow the user to directly read current measured values.

Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
Display: 4 digits, red
Digit height: 20 mm